© 2009 Microchip Technology Inc. DS21828F-page 1
25AA320A/25LC320A
Device Selection Table
Features:
Max. Clock 10 MHz
Low-Power CMOS Technology
- Max. Write Current: 5 mA at 5.5V, 10 MHz
- Read Current: 5 mA at 5.5V, 10 MHz
- Standby Current: 5 μA at 5.5V
4096 x 8-bit Organization
32-Byte Page
Self-Timed Erase and Write Cycles (5 ms max.)
Block Write Protection
- Protect none, 1/4, 1/2 or all of array
Built-in Write Protection
- Power-on/off data protection circuitry
- Write enable latch
- Write-protect pin
Sequential Read
High Reliability
- Endurance: >1M erase/write cycles
- Data retention: > 200 years
- ESD protection: > 4000V
Temperature Ranges Supported;
Pb-Free and RoHS Compliant
Description:
The Microchip Technology Inc. 25AA320A/25LC320A
(25XX320A
*
) are 32 kbit Serial Electrically Erasable
PROMs. The memory is accessed via a simple Serial
Peripheral Interface (SPI) compatible serial bus. The
bus signals required are a clock input (SCK) plus sep-
arate data in (SI) and data out (SO) lines. Access to the
device is controlled through a Chip Select (CS
) input.
Communication to the device can be paused via the
hold pin (HOLD). While the device is paused, transi-
tions on its inputs will be ignored, with the exception of
Chip Select, allowing the host to service higher priority
interrupts.
The 25XX320A is available in standard packages
including 8-lead PDIP and SOIC, and advanced
packaging including 8-lead MSOP, TSSOP and 2x3
TDFN.
Package Types (not to scale)
Part Number VCC Range Page Size Temp. Ranges Packages
25LC320A 2.5-5.5V 32 Byte I,E P, SN, ST, MS, MNY
25AA320A 1.8-5.5V 32 Byte I P, SN, ST, MS, MNY
- Industrial (I): -40°Cto +85°C
- Automotive (E): -40°C to +125°C
CS
SO
WP
V
SS
1
2
3
4
8
7
6
5
V
CC
HOLD
SCK
SI
PDIP/SOIC
(P, SN)
TSSOP/MSOP
CS
SO
WP
V
SS
1
2
3
4
8
7
6
5
V
CC
HOLD
SCK
SI
(ST, MS)
TDFN
CS
SO
WP
VSS
HOLD
SCK
SI
5
6
7
8
4
3
2
1
VCC
(MNY)
X-Rotated TSSOP
HOLD
V
CC
CS
SO
1
2
3
4
8
7
6
5
SCK
SI
V
SS
WP
(X/ST)
32K SPI Bus Serial EEPROM
*25XX320A is used in this document as a generic part number
for the 25AA320A, 25LC320A devices.
25AA320A/25LC320A
DS21828F-page 2 © 2009 Microchip Technology Inc.
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. V
SS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature .................................................................................................................................-65°C to 150°C
Ambient temperature under bias...............................................................................................................-65°C to 125°C
ESD protection on all pins..........................................................................................................................................4 kV
TABLE 1-1: DC CHARACTERISTICS
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
DC CHARACTERISTICS
Industrial (I): TA = -40°C to +85°C VCC = 1.8V to 5.5V
Automotive (E): T
A = -40°C to +125°C VCC = 2.5V to 5.5V
Param.
No.
Sym. Characteristic Min. Max. Units Test Conditions
D001 V
IH1 High-level input
voltage
.7 VCC VCC+1 V
D002 V
IL1 Low-level input
voltage
-0.3 0.3VCC VVCC2.7V
D003 VIL2 -0.3 0.2VCC VVCC < 2.7V
D004 V
OL Low-level output
voltage
—0.4VIOL = 2.1 mA
D005 VOL —0.2VIOL = 1.0 mA, VCC < 2.5V
D006 VOH High-level output
voltage
VCC -0.5 V IOH = -400 μA
D007 I
LI Input leakage current ±1 μACS = VCC, VIN = VSS TO VCC
D008 ILO Output leakage
current
—±1μACS = VCC, VOUT = VSS TO VCC
D009 CINT Internal Capacitance
(all inputs and
outputs)
—7pFTA = 25°C, CLK = 1.0 MHz,
V
CC = 5.0V (Note)
D010 I
CC Read
Operating Current
5
2.5
mA
mA
VCC = 5.5V; FCLK = 10.0 MHz;
SO = Open
VCC = 2.5V; FCLK = 5.0 MHz;
SO = Open
D011 I
CC Write
5
3
mA
mA
VCC = 5.5V
V
CC = 2.5V
D012 ICCS
Standby Current
5
1
μA
μA
CS
= VCC = 5.5V, Inputs tied to VCC or
V
SS, 125°C
CS
= VCC = 5.5V, Inputs tied to VCC or
V
SS, 85°C
Note: This parameter is periodically sampled and not 100% tested.
© 2009 Microchip Technology Inc. DS21828F-page 3
25AA320A/25LC320A
TABLE 1-2: AC CHARACTERISTICS
AC CHARACTERISTICS
Industrial (I): T
A = -40°C to +85°C VCC = 1.8V to 5.5V
Automotive (E): T
A = -40°C to +125°C VCC = 2.5V to 5.5V
Param.
No.
Sym. Characteristic Min. Max. Units Test Conditions
1FCLK Clock frequency
10
5
3
MHz
MHz
MHz
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
2T
CSS CS setup time 50
100
150
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
3T
CSH CS hold time 100
200
250
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
4T
CSD CS disable time 50 ns
5 Tsu Data setup time 10
20
30
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
6T
HD Data hold time 20
40
50
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
7T
R CLK rise time 2 μs (Note 1)
8T
F CLK fall time 2 μs (Note 1)
9T
HI Clock high time 50
100
150
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
10 T
LO Clock low time 50
100
150
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
11 T
CLD Clock delay time 50 ns
12 T
CLE Clock enable time 50 ns
13 T
V Output valid from clock
low
50
100
160
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
14 T
HO Output hold time 0 ns (Note 1)
15 T
DIS Output disable time
40
80
160
ns
ns
ns
4.5V Vcc 5.5V(Note 1)
2.5V Vcc 4.5V(Note 1)
1.8V Vcc 2.5V(Note 1)
16 T
HS HOLD setup time 20
40
80
ns
ns
ns
4.5V Vcc 5.5V
2.5V Vcc < 4.5V
1.8V Vcc < 2.5V
Note 1: This parameter is periodically sampled and not 100% tested.
2: T
WC begins on the rising edge of CS after a valid write sequence and ends when the internal write cycle is
complete.
3: This parameter is not tested but ensured by characterization. For endurance estimates in a specific
application, please consult the Total Endurance™ Model which can be obtained from Microchip’s web site
at www.microchip.com.

25LC320AX-I/ST

Mfr. #:
Manufacturer:
Microchip Technology
Description:
EEPROM 32K 4KX8 2.5V SER EE IND
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union