Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
P6SMB Transient Voltage Suppressor Diode Series
Recommended Footprint
Physical Specications
Case ...........................................Molded plastic per UL Class 94V-0
Polarity.......................Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
DIMENSIONS:
MM
(INCHES)
a
c
B
F
E
C
b
MM
(INCHES)
DIMENSIONS:
G
D
A
CATHODE
BAND
(FOR UNIDIRECTIONAL
PRODUCTS ONLY)
a
c
B
F
E
C
b
MM
(INCHES)
DIMENSIONS:
G
D
A
CATHODE
BAND
(FOR UNIDIRECTIONAL
PRODUCTS ONLY)
DimensionSMB (DO-214AA)
A
4.06 - 4.57
(0.160 - 0.180)
B
3.30 - 3.94
(0.130 - 0.155)
C
1.95 - 2.20
(0.077 - 0.087)
D
5.21 - 5.59
(0.205 - 0.220)
E
0.05 - 0.203
(0.002 - 0.008)
F
2.13 - 2.44
(0.080 - 0.103)
G
0.76 - 1.52
(0.030 - 0.060)
DIMENSIONS:
MM
(INCHES)
DimensionSMB (DO-214AA)
a (Max.)
2.69
(0.106)
b (Min.)
2.10
(0.083)
c (Min.)
1.27
(0.050)
CDDFN5-0504N - TVS/Steering Diode Array
Packaging Information
.......
.......
.....................
.....................
PA
F
E
T
120 °
D
2
D
D
1
W
1
C
Index Hole
Pin 1
Location
P
0
P
1
W
B
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
TrailerDeviceLeader
Start
d
The product will be dispensed in tape and reel format (see diagram below).
Devices are packed in accordance with EIA standard
RS-481-A and specications shown here.
DIMENSIONS:
MM
(INCHES)
REV. 06/16
P6SMB Transient Voltage Suppressor Diode Series
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
