For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or firstname.lastname@example.org
LOW NOISE AMPLIFIERS - SMT
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vdd) +5.5 Vdc
RF Input Power (RFIN)(Vdd = +3.0 Vdc) 0 dBm
Channel Temperature 175 °C
Continuous Pdiss (T= 85 °C)
(derate 3.62 mW/°C above 85 °C)
(channel to ground paddle)
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Vdd (Vdc) Idd (mA)
Typical Supply Current vs. Vdd
Note: Amplier will operate over full voltage ranges shown above.
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Part Number Package Body Material Lead Finish MSL Rating Package Marking
HMC342LC4 Alumina, White Gold over Nickel
 Max peak reow temperature of 260 °C
 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D