OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

L0103NERP

P1-P3P4-P6P7-P8
46
Revised: July 9, 2008
©2008 Littelfuse, Inc.
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (T
s(min)
) 150°C
- Temperature Max (T
s(max)
) 200°C
- Time (min to max) (t
s
) 60 – 180 secs
Average ramp up rate (Liquidus Temp)
(T
L
) to peak
5°C/second max
T
S(max)
to T
L
- Ramp-up Rate 5°C/second max
Reflow
- Temperature (T
L
) (Liquidus) 217°C
- Time (min to max) (t
s
) 60 – 150 seconds
Peak Temperature (T
P
) 260
+0/-5
°C
Time within 5°C of actual peak
Temperature (t
p
)
20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (T
P
) 8 minutes Max.
Do not exceed 280°C
Figure 7: Surge Peak On-State Current vs. Number of Cycles
12345 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1 000
2
3
4
5
6
7
8
9
10
12
15
20
Surge Current Duration – Full Cycle
1
Peak Surge (Non-repetitive) On-State Current
(I
TSM
) – Amps.
1
A Devices
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State Current [I
T(RMS)
]: Max Rated Value at Specific
Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state rated value.
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
Preheat
P
reheat
Ramp-upRamp-up
Ramp-down
R
am
p
-
do
47
©2008 Littelfuse, Inc.
Revised: July 9, 2008
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
47
©2008 Littelfuse, Inc.
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
L01 Series
EV Series 1 Amp Sensitive Triacs
EV 1.0 A TRIACs
Physical Specifications Environmental Specifications
Dimensions — TO-92 (E Package)
Dimensions
Inches Millimeters
Min Typ Max Min Typ Max
A 0.175 — 0.205 4.450 — 5.200
B 0.170 — 0.210 4.320 — 5.330
C 0.500 — — 12.700 — —
D 0.135 0.165 — 3.430 4.190 —
E 0.125 — 0.165 3.180 — 4.190
F 0.080 0.095 0.105 2.040 2.400 2.660
G 0.016 — 0.021 0.407 — 0.533
H 0.045 0.050 0.055 1.150 1.270 1.390
I 0.095 0.100 0.105 2.420 2.540 2.660
J 0.015 — 0.020 0.380 — 0.500
Test
Specifications and Conditions
AC Blocking
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature/
Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage
MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage 1008 hours; -40°C
Thermal Shock
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
Terminal Finish 100% Matte Tin-plated.
Body Material
UL recognized epoxy meeting flammability
classification 94V-0.
Lead Material Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
48
Revised: July 9, 2008
©2008 Littelfuse, Inc.
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
EV Series 1 Amp Sensitive Triacs
L01 Series
Dimensions – SOT-223
Dimensions
Inches Millimeters
Min Typ Max Min Typ Max
A 0.248 0.256 0.264 6.30 6.50 6.70
B 0.130 0.138 0.146 3.30 3.50 3.70
C — — 0.071 — — 1.80
D 0.001 — 0.004 0.02 — 0.10
E 0.114 0.118 0.124 2.90 3.00 3.15
F 0.024 0.027 0.034 0.60 0.70 0.85
G — 0.090 — — 2.30 —
H — 0.181 — — 4.60 —
I 0.264 0.276 0.287 6.70 7.00 7.30
J 0.009 0.010 0.014 0.24 0.26 0.35
K 10° MAX
Dimensions in Millimeters (Inches)
1.5
(0.059”)
1.5
(0.059”)
3.3
(0.130”)
6.4
(0.252”)
4.6
(0.181”)
1.2
(0.047”)
2.3
(0.091”)
(3x)
Pad Layout for SOT-223
Product Selector
Part Number Voltage
Gate Sensitivity Quadrants
Package
I II III IV
L0103DE 400 V 3 mA 5 mA TO-92
L0103ME 600 V 3 mA 5 mA TO-92
L0103NE 800 V 3 mA 5 mA TO-92
L0103DT 400 V 3 mA 5 mA SOT-223
L0103MT 600 V 3 mA 5 mA SOT-223
L0103NT 800 V 3 mA 5 mA SOT-223
L0107DE 400 V 5 mA 7 mA TO-92
L0107ME 600 V 5 mA 7 mA TO-92
L0107NE 800 V 5 mA 7 mA TO-92
L0107DT 400 V 5 mA 7 mA SOT-223
L0107MT 600 V 5 mA 7 mA SOT-233
L0107NT 800 V 5 mA 7 mA SOT-233
L0109DE 400 V 10 mA 10 mA TO-92
L0109ME 600 V 10 mA 10 mA TO-92
L0109NE 800 V 10 mA 10 mA TO-92
L0109DT 400 V 10 mA 10 mA SOT-223
L0109MT 600 V 10 mA 10 mA SOT-223
L0109NT 800 V 10 mA 10 mA SOT-223
P1-P3P4-P6P7-P8

L0103NERP

Mfr. #:
Buy L0103NERP
Manufacturer:
Littelfuse
Description:
Triacs SEN TRIAC 1A 800V 3 3 3 5 Ma
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet