MC33PF3001A7ES

Target Applications
• Navigation
Human-machine interface
Home automation
Industrial embedded board
manufacturer
Point of sale (POS) terminals
Internet of Things (IoT)
PF3001 Functional Internal Block Diagram
Analog Solutions—Robust Reliable Performance
PF3001
PF Series 10-Channel Configurable PMIC
Overview
The PF3001 power management integrated circuit (PMIC) features a configurable architecture
that supports numerous outputs with various current ratings as well as programmable voltage
and predefined sequencing. This enables the PF3001 to power the core processor, external
memory and peripherals to provide a single-chip system power solution in multiple applications,
reducing design complexity and lowering overall bill of materials. In consumer and industrial
environments the high-performance architecture offers a cost optimized solution for “always
ON” applications while PF3000 enables Low Power implementation.
The PF3001 is ideally suited for i.MX 6UL applications processors, and can also meet the
power consumption requirements for other low end i.MX 6 series, including the i.MX 6Solo,
i.MX 6SoloLite, i.MX 6SoloX and i.MX 7 series. The pin to pin compatibility with the PF3000
makes the i.MX and PF3000/1 solution scalable and allows to reuse the current Board Support
Package (BSP) used in multiple reference designs. This provides customers with a platform-
level solution from a single supplier to enable faster time to market and reduces
engineering effort.
PF3001 Functional Internal Block Diagram
Fixed OTP Configuration
Voltage and PWRON
Configuration Fixed
Sequence and
Timing Fixed
DVS Speed Fixed
Phasing and
Frequency Fixed
Bias and References
Logic and Control
Regulator Control
Internal Core Voltage Reference
Parallel MCU Interface
I
2
C Communication and Registers
Current Limit
Thermal
VPWR Front End LDO Overvoltage Indicator
Power Generation
Switching Regulators Linear Regulators
SW1
(0.7 V to 1.425 V,
1.8 V, 3.3 V, 2.75 A)
SW2
( 1.5 V to 1.85 V, 1.25 A) or
(2.5 V to 3.30 V, 1.25 A)
SW3
(0.90 V to 1.65 V, 1.5 A)
VCC_SD
(1.80 V or 1.85 V, 100 mA)
or (2.85 V or 3.3 V, 100 mA)
V33
( 2.85 V to 3.30 V, 350 mA)
VLDO1
(1.8 V to 3.3 V, 100 mA)
VLDO2
(0.80 V to 1.55 V, 250 mA)
VLDO3
(1.8 V to 3.3 V, 100 mA)
VLDO4
(1.8 V to 3.3 V, 350 mA)
VSNVS
(1.0 V to 3.0 V, 1.0 mA)
RTC supply with
coin cell charger
Fault Detection and Protection
Features
2.8 V to 5.5 V input voltage
10-channel, 6.6 A total power delivery
3-channel configurable buck converters
Forced PWM/PFM or APS operation
6 user programmable LDOs
Coin cell charger
Programmable output voltage, current
limit, soft-start, FSW, fault interrupt
Pin compatible with PF3000
High power 7 x 7 mm QFN package
Consumer, industrial grades available
PF3001 PMIC Enablement
KITPF3000FRDMEVM
Generic family evaluation (Common
platform with PF3000)
Friendly graphical user interface with
specific PF3000 or PF3001 display
USB interface
Complete Technical
Documentation Available
Datasheet, application notes,
EVM user guide
Easy to Use Tools
GUI and evaluation systems available to test efficiency and temperature rise
Technical and hands-on training available upon request
Features Benefits
Efficiency
4 Buck Converters with DVS in RUN mode High efficiency (> 90%) with Voltage scaling drive to lower power dissipation
6 LDOs, + coin cell charger, and RTC supply Supply multiple peripherals, lowering external component count
Forced PFM (Pulse Frequency Modulation), APS (Auto Pulse Skip)
or PWM operation
Higher light load efficiency – longer battery standby time
Simplifiy
Programmable output voltage, timing Ensure scalability across platforms (multiple i.MX applications processors usage)
5 V voltage input compatibility Simplify bill of materials by alleviating the need for a 5 V to 4.5 V converter
I
2
C digital interface for programmability On the fly voltage scaling for better system efficiency, regulator management for versatility
Low-Cost
Preprogrammed versions, optimized for dedicated i.MX applications
processors versions
Reduces design efforts since the PMICs are designed for compatibility with the i.MX
applications processors
7 x 7 mm QFN power package Allows 4 layer printed circuit boards (PCBs)
Product Differentiation
For more information visit freescale.com/PMIC
Freescale and the Freescale logo are trademarks of FreescaleSemiconductor,Inc., Reg. U.S. Pat. & Tm. Off. SMARTMOS is
a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners.
©2015FreescaleSemiconductor,Inc.
Document Number: PF3001FS REV 1
Product Core Market Ambient Temperature
MC32PF3001 Consumer -40C° to +85C°
MC34PF3001 Industrial -40C° to +105C°
Freescale
Document Number Title Description
PF3001 PF3001 Data Sheet
SG1002 Analog Product Selector Guide Selector Guide
SG200 Industrial Product Selector Guide Selector Guide

MC33PF3001A7ES

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
Power Management Specialized - PMIC MC33PF3001A7ES/HVQFN48///TRAY MULTIPLE DP BAKEABLE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union