Power by Linear™ / Analog Devices’ LT1997-2 is an attenuating (funnel) difference amplifier that can be used to translate large differential signals.
By Linear Technology 50
Analog Devices' LTC3649 60 V, 4 A synchronous monolithic step-down regulator with programmable output is ideal for industrial and automotive applications.
By Linear Technology 36
Analog Devices' LTC7106 7-bit digital-to-analog converters with PMBus interface work with the vast majority of power management controllers or regulators.
By Linear Technology 78
Analog Devices' LTC6908 precision oscillator can be easily programmed and is ideal for switching power supplies, battery equipment, and charge pump drivers.
By Linear Technology 43
Power by Linear™/Analog Devices’ LTC4278 is an integrated PD controller and switching regulator intended for high power IEEE 802.3at and 802.3af applications.
By Linear Technology 62
Power by Linear™/Analog Devices LTC4269 is an integrated PD controller and switching regulator intended for high power IEEE 802.3at and 802.3af applications.
By Linear Technology 55
Power by Linear™/ Analog Devices’ LTC4264 and LTC4265 are powered device (PD) interface controllers intended for IEEE 802.3at high-power PoE applications.
By Linear Technology 50
Analog Devices’ LTM4686 dual 10 A or single 20 A μModule® regulator with digital power system management supports telemetry polling rates up to 125 Hz.
By Linear Technology 43
The LTC6363 from Linear Technology is a low power, low noise, fully differential op amp with rail-to-rail outputs optimized to drive low power SAR ADCs.
By Linear Technology 54
Analog Devices’ LTC7000 / LTC70001 are fast, high-side, N-channel MOSFET gate drivers that operate from input voltages up to 135 V (150 V abs max).
By Linear Technology 43
Linear Technology's LT7808 is a buck-boost switching regulator controller and is compatible with most solar, automotive, telecom, and battery-powered systems.
By Linear Technology 86
Analog Devices’ LTC3372 buck DC/DC regulators are ideal for multichannel power supplies found in automotive, industrial, and always on applications.
By Linear Technology 61
Power by Linear™/Analog Devices’ LT3033 regulator supplies 3 A output current with 95 mV typical dropout voltage.
By Linear Technology 52
Analog Devices' 90 MHz, 2200 V/µs, 30 V amplifiers for data acquisition systems, wideband single amplifications, and high-fidelity video/audio applications.
By Linear Technology 729
Analog Devices’ LTC4126 7.5 mA Li-Ion battery charger for Li-Ion battery powered hearing aid, IoT wearables, and wireless headset applications.
By Linear Technology 48
Power by Linear™/ADI's LT3094 negative regulators feature ADI's ultra-low noise and ultra-high PSRR architecture for powering noise-sensitive applications.
By Linear Technology 66
Power by Linear™/Analog Devices LTC3880/LTC3887 are dual, PolyPhase® DC/DC synchronous step-down switching regulator controllers.
By Linear Technology 39
Linear Technology's LTC6810 is a multicell battery stack monitor that measures up to six series-connected battery cells.
By Linear Technology 76
Linear Technology's LTC4376 is a 7 A ideal diode with reverse input protection, which reduces power consumption, heat dissipation, and PC board area.
By Linear Technology 77
ADI's LTC6560/LTC6561 are low-noise, transimpedance amplifiers with 220 MHz bandwidth well suited for LIDAR receivers with multiple APDs.
By Linear Technology 45