Murata Power Solutions SPM15/25 series isolated DC/DC converters represent the next generation in Industrial Potted Module Technology.
By Murata Power Solutions Inc 156
The MGJ2 series of 2 W high isolation dual output DC/DC converters from Murata Power Solutions are suitable for powering high-side and low-side gate drives in bridge circuits.
By Murata Power Solutions Inc 71
Murata Power Solutions has introduced the NXE1 series of low-cost 1 W DC/DC, ultra-compact converters measuring only 12.7 mm x 10.4 mm x 4.8 mm.
By Murata Power Solutions Inc 74
Murata has introduced the MTC1 Series of 1 W regulated single output DC-DC converters that comprises a total of six single output models.
By Murata Power Solutions Inc 61
Murata's NCS3 series offers continuous output short circuit protection and certification to the internationally recognized UL60950 safety standard.
By Murata Power Solutions Inc 91
Murata's SPC-54/4.4-L12PG-C delivers isolated 54 V Power over Ethernet (PoE) at up to 240 W and can power up to nine PoE devices at 25.5 W from a 12 V source.
By Murata Power Solutions Inc 91
Murata’s BPM15 series address a growing demand for rugged isolated DC-DC modules that accept 4:1 input ranges of 9 VDC to 36 VDC and 18 VDC to 75 VDC.
By Murata Power Solutions Inc 70
Murata has announced the D1U54P-W-650-12-HBxC series of 650 W power supplies manufactured by Murata Power Solutions.
By Murata Power Solutions Inc 51
Murata Power Solutions is pleased to announce the MTC2 series of 2 W single output, regulated, and isolated DC/DC converters.
By Murata Power Solutions Inc 104
Murata Power Solutions' MYMGK series of miniature "mono block" type, surface-mount, point-of-load (PoL) DC-DC converters available with two output voltage range options.
By Murata Power Solutions Inc 50
Murata offers its MGJ6 series 6 W high isolation DC-DC converters for powering 1GBT gate drive circuits where high isolation and high efficiency are paramount.
By Murata Power Solutions Inc 131
Murata Power Solutions' CRE1, CRE2, CRR1, CRV1, and CRV2 family of industrial temperature range DC-DC converters are available in SIP, DIP, and SMD packages.
By Murata Power Solutions Inc 95
Murata's OKDx-T/90-W12-xxx-C 94% efficient, 90 A, PMBus™ compliant PoL DC-DC converter series targeted for FPGA and processor power applications and is available in three different package con
By Murata Power Solutions Inc 53
Murata announces its wide input range, single output PQC series of industrial/medical power supplies from Murata Power Solutions.
By Murata Power Solutions Inc 64
Murata's NXF1 series DC/DC converters designed for alternative energy/solar power, transportation, telecom/wireless equipment, and medical applications.
By Murata Power Solutions Inc 114
Murata Power's 782100 series transformers are designed specifically for use with pSemi PE22100 push-pull DC-DC converter driver ICs.
By Murata Power Solutions Inc 434
Murata's DRQ-11.4/88-L48 series of DC/DC converter modules address the growing power requirements of networking and telecommunications equipment.
By Murata Power Solutions Inc 107
Murata Power Solutions' 782100 transformer combines with pSemi's (formerly Peregrine Semiconductor) PE22100 push-pull driver to save dev time of power supplies.
By Murata Power Solutions Inc 77
The Murata Power Solutions NXJ2 series is a range of lower-profile, fully-automated manufacture surface mount DC/DC converters.
By Murata Power Solutions Inc 118
Murata Power Solutions' MYMGK1R812 series of miniature monoblock-type non-isolated point-of-load DC-DC power converters is designed for embedded applications.
By Murata Power Solutions Inc 161