SN65LVPE501RGER

Mfr. #:: SN65LVPE501RGER
Description:: Interface - Signal Buffers, Repeaters Dual Ch x1 PCI Exp Gen II Redrvr/Equal
Lifecycle:: New from this manufacturer.
Datasheet:: SN65LVPE501RGER Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
More Information:: SN65LVPE501RGER more Information SN65LVPE501RGER Product Details

Product Attribute
Attribute Value

Manufacturer:: Texas Instruments

Product Category:: Interface - Signal Buffers, Repeaters

RoHS:: Y

Minimum Operating Temperature:: - 40 C

Maximum Operating Temperature:: + 85 C

Mounting Style:: SMD/SMT

Package / Case:: VQFN-24

Packaging:: Reel

Application:: USB3.0 & PCI Express GenII

Series:: SN65LVPE501

Brand:: Texas Instruments

Moisture Sensitive:: Yes

Operating Supply Current:: 120 mA

Product Type:: Signal Buffers, Repeaters

Factory Pack Quantity:: 3000

Subcategory:: Interface ICs

Unit Weight:: 0.001926 oz

Tags: SN65LVPE50, SN65LVPE, SN65LVP, SN65LV, SN65L, SN65, SN6

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

SN65LVPE501RGER Description

***as Instruments: Dual channel single-lane PCI Express Gen II redriver 24-VQFN -40 to 85

***Yang: Interface - Signal Buffers, Repeaters Dual Ch x1 PCI Exp Gen II Redrvr/Equal

*** Source Electronics: LVDS Driver 5000Mbps 24-Pin VQFN EP T/R / IC REDRIVER PCIE 2CH 24VQFN

***et: PCIe Redriver and Equalizer 24-Pin VQFN EP T/R

***p One Stop Global: CML Repeater 3.3V 24-Pin VQFN EP T/R

***DA Technology Co., Ltd.: Product Description Demo for Development.

***el Electronic: IC NANOPOWER COMPARATOR 8-SOIC

*** Stop Electro: Telecom Circuit, 2-Func, CMOS, PQCC24

***as Instruments: 155-Mbps to 4.25-Gbps laser driver 24-VQFN -40 to 85

***ark: Driver IC; Package/Case:24-VQFN; No. of Pins:24; Operating Temperature Range:-40°C to +85°C; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes; Bias Current:100mA; Data Rate:4.25Gbps; Driver Case Style:VQFN ;RoHS Compliant: Yes

***nell: LSR DRVR 4.25GBPS 3.6V 24VQFN; Laser Driver Type:Laser Diode; Supply Current:22mA; Bias Current:100mA; Modulation Current:85mA; Data Rate:4.25Gbps; Supply Voltage Range:3V to 3.6V; Driver Case Style:VQFN; No. of Pins:24; SVHC:No SVHC (18-Jun-2010); Package / Case:VQFN; Base Number:4211; Operating Temperature Range:-40°C to +85°C; Supply Current Max:22mA; Supply Voltage Max:3.6V; Supply Voltage Min:3V; Termination Type:SMD

***as Instruments: 8-channel 2.3- to 5.5-V I2C/SMBus switch with reset & voltage translation 24-VQFN -40 to 85

***et: I2C Multiplexer 1-Element 8-IN 24-Pin VQFN EP T/R

***ark: 8I/P DUAL I2C SWITCH, 5.5V, VQFN-24, FULL REEL

***i-Key: IC INTERFACE SPECIALIZED 24VQFN

***ponent Stockers USA: 9548 SERIES 8 LINE TO 1 LINE MULTIPLEXER TRUE OUTPUT QCC24

***ser: Logic - I2C 8-Channel I2C Switch with Reset

***DA Technology Co., Ltd.: Product Description Demo for Development.

***i-Key Marketplace: PCA9548A 8-CHANNEL I2C SWITCH WI

***el Electronic: 16-RAIL PMBUS POWER SUPPLY SEQUE

***as Instruments: Ultra Low Power Stereo Audio Codec with miniDSP and Stereo Digital Microphone Input 24-VQFN -40 to 85

***ical: General Purpose Audio Codec 2ADC / 2DAC Ch 24-Pin VQFN EP T/R

***ment14 APAC: CODEC, STEREO AUDIO, ADJ, 24VQFN; Audio CODEC Type:Stereo; No. of DACs:2; No. of Input Channels:4; No. of Output Channels:2; ADC / DAC Resolution:32bit; ADCs / DACs Signal to Noise Ratio:100dB; Sampling Rate:192kSPS; Interface Type:I2C, SPI; Supply Voltage Range:1.5V to 3.6V, 1.26V to 1.95V, 1.1V to 3.6V; Operating Temperature Range:-40°C to +85°C; Audio IC Case Style:QFP; No. of Pins:24; MSL:MSL 2 - 1 year; SVHC:No SVHC (19-Dec-2011); Base Number:320; Interface:I2C, Serial; Sample Rate:192 kSPS

***as Instr.: The SN65LVPE501 is a dual channel, single lane PCIe redriver and signal conditioner supporting data rates of up to 5.0Gbps. The device complies with PCIe spec revision 2.1.

***AS INSTRUMENTS INC: Programmable EQ, De-Emphasis and Amplitude Swing

***OMO Electronic: The SN65LVPE501 is designed to minimize the signal degradation effects such as crosstalk and inter-symbol interference (ISI) that limits the interconnect distance between two devices. The input stage of each channel offers selectable equalization settings that can be programmed to match loss in the channel. The differential outputs provide selectable de-emphasis to compensate for the anticipated distortion PCIe signal will experience. Level of de-emphasis will depend on the length of interconnect and its characteristics. Both equalization and de-emphasis levels are controlled by the setting of signal control pins EQ1, EQ2 and DE1, DE2.

***AS INSRUMENTS: To provide additional control of signal integrity in extended backplane applications LVPE501 provides independent output amplitude control for each channel. See for setting details.

***as Instruments (TI): Device PowerOn Device initiates internal power-on reset after VCC has stabilized. External reset can also be applied at anytime by toggling RST pin. External reset is recommended after every device power-up. When RST is driven high, the device samples the state of EN_RXD, if it is set H device enters Rx.Detect state where each channel will perform Rx.Detect function (as described in PCIe spec). If EN_RXD is set L, automatic RX detect function is disabled and both channels are enabled with their termination set to ZDC_RX.

***ASI: Receiver Detection While EN_RXD pin is H and device is not in sleep mode (RST is H), SN65LVPE501 performs RX.Detect on both channels indefinitely until remote termination is detected on both channels. Automatic Rx detection feature can be forced off by driving EN_RXD low. In this state both channels input termination are set to ZDC_RX.

***AS INSTUMENTS: Sleep (Shut_Down) Mode This is low power state triggered by RST = L. In sleep mode receiver termination resistor for each of the two channels is switched to ZRX-HIGH_IMP of >50 KΩ and transmitters are pulled to Hi-Z state. Device power is reduced to <1mW (TYP). To get device out of sleep mode RST is toggled L-H.

***AS USD: Electrical Idle Support A link is in an electrical idle state when the TX± voltage is held at a steady constant value like the common mode voltage. SN65LVPE501 detects an electrical idle state when RX± input voltage of the associated channel falls below VEID_TH min. After detection of an electrical idle state in a given channel the device asserts electrical idle state in its corresponding TX. When RX± voltage exceeds VEID_TH max, normal device operation is restored and output starts passing input signal. Electrical idle exit and entry time is specified at ≤6ns.

***ASI: Electrical idle support is independent for each channel.

***XS: Power Save Features The device supports three power save modes as described below.

***as Instruments (TI): 1. Sleep (Shut_Down) Mode

***AS INST: This mode can be enabled from any state (Rx detect or active) by driving RST L. In this state both channels have their termination set to ZRX-HIGH_IMP+ and outputs are at Hi-Z. Device power is 1mW (MAX)

***AS: 2. Auto Low Power Mode

***INS: This mode is enabled when PS pin is tied H and device is in active mode. In this mode anytime Vindiff_pp falls below selected VEID_TH for a and stays below VEID_TH for >1µs (TYP), the associated CH will enter auto low power (ALP) mode where power/CH will be reduced to <1/3rd of normal operating power/CH or about 70mW under typical voltage of 3.3V when ALP conditions are met for both channels. A CH will exit ALP mode whenever Vindiff_pp exceeds max VEID_TH for that channel. Exit latency is 30ns max. To use this mode link latency will need to account for the ALP exit time for N_FTS. ALP mode is handled by each channel independently based on its input differential signal level. This mode can be disabled by leaving PS as NC or tying PS to GND via 4.7kύ.

***as Instr.: 3. Cable Disconnect Mode

***AS INTRUMENTS: This mode is activated when RST is H, EN_RXD = H, and no termination is detected by either channel. Device is in the Rx.Detect state whereby it is continuously performing Rx.Detect on both channels. In this state total power consumed by device is typically <3% of normal active power. Or <10mW (MAX).

***AS INSTR: Beacon Support With its broadband design, the SN65LVPE501 supports low frequency Beacon signal (as defined by PCIe 2.1 spec) used to indicate wake-up event to the system by a downstream device when in L2 power state. All requirements for a beacon signal as specified in PCI Express specification 2.1 must be met for device to pass beacon signals.

***AS INSTRUMEN: Devic Power

***INS: The SN65LVPE501 is designed to operate from a single 3.3V supply. Always practice proper supply sequencing procedure. Apply VCC first before any input control pin signals are applied to the device. Power-down sequence is in reverse order.

Market price

Part #	Description	Stock	Price
SN65LVPE501RGER DISTI # 296-49262-1-ND	IC REDRIVER PCIE 2CH 24VQFN RoHS: Compliant Min Qty: 1 Container: Cut Tape (CT)	1726In Stock	1000:$5.1393 500:$5.9007 100:$6.7762 10:$8.1850 1:$9.0600
SN65LVPE501RGER DISTI # 296-49262-6-ND	IC REDRIVER PCIE 2CH 24VQFN RoHS: Compliant Min Qty: 1 Container: Digi-Reel®	1726In Stock	1000:$5.1393 500:$5.9007 100:$6.7762 10:$8.1850 1:$9.0600
SN65LVPE501RGER DISTI # 296-49262-2-ND	IC REDRIVER PCIE 2CH 24VQFN RoHS: Compliant Min Qty: 3000 Container: Tape & Reel (TR)	Temporarily Out of Stock	3000:$4.8048
SN65LVPE501RGER DISTI # 31718819	CML Repeater 3.3V 24-Pin VQFN EP T/R RoHS: Compliant	9000	3000:$4.8050
SN65LVPE501RGER DISTI # SN65LVPE501RGER	PCIe Redriver and Equalizer 24-Pin VQFN EP T/R - Tape and Reel (Alt: SN65LVPE501RGER) RoHS: Compliant Min Qty: 3000 Container: Reel	Americas - 0	3000:$5.2900 6000:$5.0900 12000:$4.8900 18000:$4.6900 30000:$4.5900
SN65LVPE501RGER	Dual Channel Single Lane PCI Express Gen II Redriver	3000	1000:$4.2000 750:$4.2900 500:$4.9500 250:$5.6900 100:$6.1000 25:$6.8000 10:$7.2800 1:$8.0900
SN65LVPE501RGER	Telecom Circuit, 2-Func, CMOS, PQCC24 RoHS: Compliant	2822	1000:$4.8700 500:$5.1300 100:$5.3400 25:$5.5600 1:$5.9900
SN65LVPE501RGET DISTI # 595-SN65LVPE501RGET	Interface - Signal Buffers, Repeaters Dual Ch x1 PCI Exp Gen II Redrvr/Equal RoHS: Compliant	636	1:$10.0900 10:$9.1300 25:$8.4500 100:$7.5600 250:$7.1700 500:$6.5800 1000:$5.7300
SN65LVPE501RGER DISTI # 595-SN65LVPE501RGER	Interface - Signal Buffers, Repeaters Dual Ch x1 PCI Exp Gen II Redrvr/Equal RoHS: Compliant	0	1:$8.8000 10:$7.9500 25:$7.3600 100:$6.5800 250:$6.2500 500:$5.7300 1000:$4.9900 2000:$4.8100

Image	Part #	Description
	Mfr.#: SN65LVPE501RGET OMO.#: OMO-SN65LVPE501RGET	Interface - Signal Buffers, Repeaters Dual Ch x1 PCI Exp Gen II Redrvr/Equal
	Mfr.#: SN65LVPE504RUAR OMO.#: OMO-SN65LVPE504RUAR	Interface - Signal Buffers, Repeaters 4Ch PCI Exp Gen II Redriver/Equalizer
	Mfr.#: SN65LVP20DRFR OMO.#: OMO-SN65LVP20DRFR	LVDS Interface IC 4-Gbps PECL to LVPECL Repeater
	Mfr.#: SN65LVP16EVM OMO.#: OMO-SN65LVP16EVM	Other Development Tools SN65LVP16 Eval Module
	Mfr.#: SN65LVP18EVM OMO.#: OMO-SN65LVP18EVM-TEXAS-INSTRUMENTS	EVALUATION MODULE FOR SN65LVP18
	Mfr.#: SN65LVP19DRFR OMO.#: OMO-SN65LVP19DRFR-TEXAS-INSTRUMENTS	IC REDRIVER 1CH 2GBPS 8WSON
	Mfr.#: SN65LVPE502A OMO.#: OMO-SN65LVPE502A-1190	New and Original
	Mfr.#: SN65LVPE501RGER OMO.#: OMO-SN65LVPE501RGER-TEXAS-INSTRUMENTS	Interface - Signal Buffers, Repeaters Dual Ch x1 PCI Exp Gen II Redrvr/Equal
	Mfr.#: SN65LVP18DRFR OMO.#: OMO-SN65LVP18DRFR-TEXAS-INSTRUMENTS	LVDS Interface IC 2.5/3.3-V Oscillator Gain Stage/Buffe
	Mfr.#: SN65LVP17EVM OMO.#: OMO-SN65LVP17EVM-TEXAS-INSTRUMENTS	EVALUATION MODULE FOR SN65LVP17

SN65LVPE501RGER

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes