3010AN25

Mfr. #:: 3010AN25
Manufacturer:: Honeywell Sensing and Productivity Solutions
Description:: SENSOR VRS SINE WAVE CONNECTOR
Lifecycle:: New from this manufacturer.
Datasheet:: 3010AN25 Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

Product Attribute
Attribute Value

Manufacturer: Honeywell Sensing and Productivity Solutions

Product Category: Magnetic Sensors - Position, Proximity, Speed (Modules)

Series: 3010

Type: VRS (Passive)

Termination-Style: Connector

Package-Case: Barrel, Stainless Steel

Frequency: 50kHz

Operating-Temperature: -55°C ~ 120°C (TA)

Output-Type: Sine Wave

Voltage-Supply: -

Actuator-Material: Ferrous Metals, Gear Tooth

Must-Operate: -

Must-Release: -

Tags: 3010AN, 3010A, 3010, 301

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

3010AN25 Description

***ell Electronics: Sensors, Magnetic Position Sensors, Speed and Direction - Variable Reluctance Speed Sensors

***(Formerly Allied Electronics): SENSOR, GENERAL PURPOSE, 2 PIN CONNECTOR TERMINATION, 2.5 THREAD LENGTH, IN.

***nell: SPEED SENSOR, VRS, 0.5M/S, 40V; Supply V; SPEED SENSOR, VRS, 0.5M/S, 40V; Supply Voltage Min: -; Supply Voltage Max: -; Sensor Terminals: Connector; Operating Temperature Min: -55°C; Operating Temperature Max: 120°C; Speed Sensor Type: VRS General Purpose; Inductance: 25mH

***eywell: General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Honeywell also offers VRS sensors for high output, power output, high resolution, high temperature and hazardous location applications, as well as low-cost molded versions.

***ell Electronics: Sensors, Magnetic Position Sensors, Speed and Direction - Variable Reluctance Speed Sensors

***(Formerly Allied Electronics): SENSOR, GENERAL PURPOSE, 2 PIN CONNECTOR TERMINATION, 1.1 THREAD LENGTH, IN.

***eywell: General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Honeywell also offers VRS sensors for high output, power output, high resolution, high temperature and hazardous location applications, as well as low-cost molded versions.

***ell Electronics: Sensors, Magnetic Position Sensors, Speed and Direction - Variable Reluctance Speed Sensors

***ment14 APAC: VRS SPEED SENSOR 190V 910 OHM to 1200 OH; VRS SPEED SENSOR 190V 910 OHM to 1200 OHM 0.25ms; Speed Sensor Type:VRS General Purpose; Output Voltage (Peak to Peak):190V p-p; Housing Diameter:15.87mm; Coil Resistance Min:910ohm; Coil Resistance Max:1.2kohm; Surface Speed:0.25m/s

***eywell: Power Output VRS sensors are designed for driving low resistance loads at large air gaps in applications where larger actuators may be used. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Honeywell also offers VRS sensors for general purpose, high output, high resolution, high temperature and hazardous location applications, as well as low-cost molded versions.

***ark: VRS SPEED SENSOR 190V 910 OHM to 1200 OHM 0.25 ms; Speed Sensor Type:VRS General

***ell Electronics: Sensors, Magnetic Position Sensors, Speed and Direction - Variable Reluctance Speed Sensors

***(Formerly Allied Electronics): SENSOR, HIGH OUTPUT, 910 TO 1200 COIL RES., 190 OUTPUT VOLTAGE, 3.0 IN. THREAD L

***eywell: High Output VRS sensors are designed for use in applications where higher output voltages are needed. They perform best at low to medium speeds with medium to high impedance loads. Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux lines of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Honeywell also offers VRS sensors for general purpose, power output, high resolution, high temperature, and hazardous location applications, as well as low-cost molded versions.

***ical: Proximity Sensor Inductive NO NPN 1cm 10V to 55VDC 2-Pin

***(Formerly Allied Electronics): NPN-NO Barrelinductive Prox Sensor; M18; 10mm Detection Range; 12 to 24Vdc; IP67

***lton-Bates: Inductive Sensor 10 mm Sensing 10-55V DC M18x1 Connector 3-Wire DC N.O. (NPN)

***ical: Proximity Sensor Inductive NO 5mm 20V to 264VAC

***er Electronics: Proximity Sensors Proximity Sensor

***(Formerly Allied Electronics): Proximity Sensor; M12 5MM DC3W-NO

***i-Key: SENSOR PROX INDUCTIVE 5MM CYLIND

***lton-Bates: Inductive Proximity General Purpose Sensor Tubular Threaded 24-240V AC 25 Hz

***(Formerly Allied Electronics): Proximity Sensor, M8, 2 mm, 24 to 240 VAC, 1.7 mA (Max.), 25 Hz

***o: OMRON E2E-X2Y1-M1 Proximity Sensor,Inductive,12mm,NO

***ayComponents: Inductive Proximity Sensor Sensor Input:Inductive; Sensing Range:2mm; Sensing Range Max:2mm; Supply Voltage Max:24VDC; Supply Voltage Min:12VDC; Load Current RMS Max:100mA; Mounting Type:Panel; Sensing Face Diameter:12mm

Market price

Part #	Mfg.	Description	Stock	Price
3010AN25 DISTI # 480-3257-ND	Honeywell Sensing and Control	SENSOR VRS SINE WAVE CONNECTOR RoHS: Not compliant Min Qty: 20 Container: Bulk	Temporarily Out of Stock	20:$117.6160
3010AN25 DISTI # 88W2152	Honeywell Sensing and Control	SPEED SENSOR, VRS, 0.5M/S, 40V,Supply Voltage Min:-,Supply Voltage Max:-,Sensor Terminals:Connector,Operating Temperature Min:-55°C,Operating Temperature Max:120°C,Speed Sensor Type:VRS General Purpose,Inductance:25mH RoHS Compliant: Yes	4	100:$93.8900 50:$97.2400 25:$101.9600 10:$106.0800 5:$112.4100 1:$125.0200
3010AN25 DISTI # 70118439	Honeywell Sensing and Control	Sensor,General Purpose,2-Pin Termination Connection,2.5in Thread Length RoHS: Compliant	7	1:$142.9600 3:$136.1500 5:$125.2600
3010AN25 DISTI # 785-.3010AN25	Honeywell Sensing and Control	Speed Sensors M16,40Vp-p,2.69mm 5/8-18 UNF-2A,15.9mm RoHS: Not compliant	0	1:$125.0200 2:$120.1200 5:$112.4100 10:$106.0800 25:$101.9600 50:$97.2400
3010AN25	Honeywell Sensing and Control / Clarostat	General Purpose VRS Sensor Automotive 2-Pin RoHS: Compliant	16	1:$127.5700 5:$111.8500 10:$105.1300 25:$95.1400
3010AN25 DISTI # 2526147	Honeywell Sensing and Control	SPEED SENSOR, VRS, 0.5M/S, 40V RoHS: Compliant	4	50:$153.8700 25:$161.3400 10:$167.8600 5:$177.8700 2:$190.0800 1:$197.8400
3010AN25 DISTI # 2526147	Honeywell Sensing and Control	SPEED SENSOR, VRS, 0.5M/S, 40V RoHS: Compliant	4	50:£94.0700 25:£94.8900 10:£95.7200 5:£96.5400 1:£107.0000
3010AN25 DISTI # 000000000001502387	Honeywell Sensing and Control / MICRO SWITCH	General Purpose VRS Sensor 2-Pin	0	1:$113.5100 3:$110.2600 7:$104.3100 14:$102.9100
3010AN25 DISTI # 3010AN25	Honeywell Sensing and Control		16	1:$127.5700 5:$111.8500 10:$105.1300 25:$95.1400

Image	Part #	Description
	Mfr.#: 30101BC OMO.#: OMO-30101BC-MURATA-POWER-SOLUTIONS	Fixed Inductors 100nH 37A SMT 10x7x5mm
	Mfr.#: 3010 RED OMO.#: OMO-3010-RED-1190	New and Original
	Mfr.#: 3010-6R8 OMO.#: OMO-3010-6R8-1190	New and Original
	Mfr.#: 30102BCA OMO.#: OMO-30102BCA-1190	New and Original
	Mfr.#: 3010362R2Y OMO.#: OMO-3010362R2Y-1190	New and Original
	Mfr.#: 3010L63C OMO.#: OMO-3010L63C-1190	New and Original
	Mfr.#: 3010R07 OMO.#: OMO-3010R07-1190	New and Original
	Mfr.#: 3010HTB OMO.#: OMO-3010HTB-450	Motion & Position Sensors Speed Sensors VRS Speed Senso
	Mfr.#: 3010AN25 OMO.#: OMO-3010AN25-HONEYWELL-SENSING-PRODUCTIVITY	SENSOR VRS SINE WAVE CONNECTOR
	Mfr.#: 301000A04M050 OMO.#: OMO-301000A04M050-1190	Cable Assembly STOOW 5m 22AWG Mini Change 10 POS F Mini-Change®

3010AN25

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes