TPIC44L02DB

Mfr. #:: TPIC44L02DB
Description:: Gate Drivers 4Ch Ser/Para Low- Side Pre-FET Drvr
Lifecycle:: New from this manufacturer.
Datasheet:: TPIC44L02DB Datasheet
Delivery:: DHL FedEx Ups TNT EMS
Payment:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
More Information:: TPIC44L02DB more Information TPIC44L02DB Product Details

Product Attribute
Attribute Value

Manufacturer:: Texas Instruments

Product Category:: Gate Drivers

RoHS:: Y

Product:: MOSFET Gate Drivers

Type:: Low Side

Mounting Style:: SMD/SMT

Package / Case:: SSOP-24

Number of Drivers:: 4 Driver

Output Current:: 1.2 mA

Rise Time:: 3.5 us

Fall Time:: 3 us

Supply Voltage - Min:: 4.5 V

Supply Voltage - Max:: 5.5 V

Operating Supply Current:: 2.6 mA

Minimum Operating Temperature:: - 40 C

Maximum Operating Temperature:: + 125 C

Series:: TPIC44L02

Packaging:: Tube

Features:: Diagnostics, Fault Protection, Pre-FET Driver

Operating Temperature Range:: - 40 C to + 125 C

Technology:: Si

Brand:: Texas Instruments

Shutdown:: Yes

Maximum Turn-Off Delay Time:: 3.5 us

Maximum Turn-On Delay Time:: 4 us

Operating Supply Voltage:: 5 V

Product Type:: Gate Drivers

Factory Pack Quantity:: 60

Subcategory:: PMIC - Power Management ICs

Unit Weight:: 0.059966 oz

Tags: TPIC44L02, TPIC44L0, TPIC44L, TPIC44, TPIC4, TPIC, TPI

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: info@omo-ic.com

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TPIC44L02DB Ratings and Reviews

V***a

Everything is super.

2019-01-20

D***V

Thank you all received

2019-04-05

C***n

Good for the price. Need to sand the sd card hole a little bit.

2019-01-18

TPIC44L02DB Description

***as Instruments: 4-Channel Serial/Parallel Low-Side Pre-FET Driver 24-SSOP -40 to 125

***ical: Driver 3V 0.0012A 4-OUT Low Side Non-Inv 24-Pin SSOP T/R

***ark: TPOD 4 CHANNEL PREDRIVER WTH AUTO-ENABLE

***AS INSTR: The TPIC44L01, TPIC44L02, and TPIC44L03 are low-side predrivers that provide serial and parallel input interfaces to control four external FET power switches such as offered in the TI TPIC family of power arrays. These devices are designed primarily for low-frequency switching, inductive load applications such as solenoids and relays. Fault status for each channel is available in a serial-data format. Each driver channel has independent off-state open-load detection and on-state shorted-load/short-to-battery detection. Battery overvoltage and undervoltage detection and shutdown is provided on the TPIC44L01/L02. On the TPIC44L03 driver, only over-battery voltage shutdown is provided. Each channel also provides inductive-voltage-transient protection for the external FET.

***XS: These devices provide control of output channels through a serial input interface or a parallel input interface. A command to enable the output from either interface enables the respective channels gate output to the external FET. The serial interface is recommended when the number of signals between the control device and the predriver must be minimized and the speed of operation is not critical. In applications where the predriver must respond very quickly or asynchronously, the parallel input interface is recommended.

***AS INSTRUMEN: For serial operation, the control device must transition CS\ from high to low to activate the serial input interface. When this occurs, SDO is enabled, fault data is latched into the serial interface, and the fault flag is refreshed.

***AS INSTRUMENTS INC: Data is clocked into the serial registers on low-to-high transitions of SCLK through SDI. Each string of data must consist of at least four bits of data. In applications where multiple devices are cascaded together, the string of data must consist of four bits for each device. A high data bit turns the respective output channel on and a low data bit turns it off. Fault data for the device is clocked out of SDO as serial input data is clocked into the device. Fault data consists of fault flags for shorted-load and open-load flags (bits 0\x963) for each of the four output channels. A high bit in the fault data indicates a fault and a low bit indicates that no fault is present for that channel. Fault register bits are set or cleared asynchronously to reflect the current state of the hardware. A fault must be present when CS\ is transitioned from high to low to be captured and reported in the serial fault data. New faults cannot be captured in the serial register when CS\ is low. CS\ must be transitioned high after all of the serial data has been clocked into the device. A low-to-high transition of CS\ transfers the last four bits of serial data to the output buffer puts SDO in a high-impedance state and clears and reenables the fault register. The TPIC44L01/L02/L03 was designed to allow the serial input interfaces of multiple devices to be cascaded together to simplify the serial interface to the controller. Serial input data flows through the device and is transferred out SDO following the fault data in cascaded configurations.

***AS INS: For parallel operation, data is transferred directly from the parallel input interface IN0-IN3 to the respective GATE(0\x963) output asynchronously. SCLK or CS\ is not required for parallel control. A 1 on the parallel input turns the respective channel on, where a 0 turns it off. Note that either the serial input interface or the parallel input interface can enable a channel. Under parallel operation, fault data must still be collected through the serial data interface.

***: The predrivers monitor the drain voltage for each channel to detect shorted-load or open-load fault conditions in the the on and off states respectively. These devices offer the option of using an internally generated fault-reference voltage or an externally supplied fault-reference voltage through VCOMP for fault detection. The internal fault reference is selected by connecting VCOMPEN to GND and the external reference is selected by connecting VCOMPEN to VCC. The drain voltage is compared to the fault reference when the channel is turned on to detect shorted-load conditions and when the channel is off to detect open-load conditions. When a shorted fault occurs using the TPIC44L01 or the TPIC44L03, the channel is turned off and a fault flag is sent to the control device as well as to the serial fault register bits. If a fault occurs while using the TPIC44L02, the channel transitions into a low-duty cycle, pulse-width-modulated (PWM) signal as long as the fault is present. Shorted-load fault conditions must be present for at least the shorted-load deglitch time, t(STBDG), to be flagged as a fault. A fault flag is sent to the control device as well as the serial fault register bits. More detail on fault detection operation is presented in the device operation section of this data sheet.

***AS INSTRUMENTS INCORPORATED: These devices provide protection from over-battery voltage and under-battery voltage conditions irrespective of the state of the output channels. When the battery voltage is greater than the overvoltage threshold or less than the undervoltage threshold, all channels are disabled and a fault flag is generated. Battery-voltage faults are not reported in the serial fault data. The outputs return to normal operation once the battery-voltage fault has been corrected. When an over-battery/under-battery voltage condition occurs, the device reports the battery fault, but disables fault reporting for open- and shorted-load conditions. Fault reporting for open- and shorted-load conditions are reenabled after the battery fault condition has been corrected.

***AS INSRUMENTS: These devices provide inductive transient protection on all channels. The drain voltage is clamped to protect the FET. The clamp voltage is defined by the sum of VCC and turnon voltage of the external FET. The predriver also provides a gate-to-source voltage (VGS) clamp to protect the gate-source terminals of the power FET from exceeding their rated voltages. An external active low RESET\ is provided to clear all registers and flags in the device. GATE(0\x963) outputs are disabled after RESET\ has been pulled low.

***AS INSRUMENT: These devices provide pulldown resistors on all inputs except CS\ and RESET\. A pullup resistor is used on CS\ and RESET\.

Market price

Part #	Description	Stock	Price
TPIC44L02DB DISTI # V39:1801_07410364	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R RoHS: Compliant	720	9000:$0.9681 6000:$0.9779 3000:$0.9878 60:$1.7175
TPIC44L02DB DISTI # V36:1790_07410364	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R RoHS: Compliant	7	9000:$0.9681 6000:$0.9779 3000:$0.9878 60:$1.7175
TPIC44L02DBG4 DISTI # V39:1801_07410365	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R	0
TPIC44L02DBR DISTI # V39:1801_07410366	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R RoHS: Compliant	0
TPIC44L02DB DISTI # 296-10868-5-ND	IC DRIVER PRE FET 4 CHAN 24-SSOP RoHS: Compliant Min Qty: 1 Container: Tube	1036In Stock	5040:$0.9152 2520:$0.9504 1020:$1.0208 540:$1.2320 120:$1.4995 60:$1.7600 10:$1.8660 1:$2.0800
TPIC44L02DBRG4 DISTI # TPIC44L02DBRG4-ND	IC DRIVER PRE FET 4 CHAN 24-SSOP RoHS: Compliant Min Qty: 2000 Container: Tape & Reel (TR)	Limited Supply - Call
TPIC44L02DBR DISTI # TPIC44L02DBR-ND	IC DRIVER PRE FET 4 CHAN 24-SSOP RoHS: Compliant Min Qty: 2000 Container: Tape & Reel (TR)	Temporarily Out of Stock	2000:$0.9504
TPIC44L02DBG4 DISTI # TPIC44L02DBG4-ND	IC DRIVER PRE FET 4 CHAN 24SSOP RoHS: Compliant Min Qty: 360 Container: Tube	Temporarily Out of Stock	360:$1.4080
TPIC44L02DBR DISTI # 26644363	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R RoHS: Compliant	10000	4000:$1.0507 2000:$1.1733
TPIC44L02DB DISTI # 31721195	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R RoHS: Compliant	1800	1000:$0.9187 500:$1.1088 360:$1.3496
TPIC44L02DB DISTI # 30673363	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP T/R RoHS: Compliant	720	9000:$1.0407 6000:$1.0512 3000:$1.0619 60:$1.8463
TPIC44L02DB DISTI # TPIC44L02DB	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP - Rail/Tube (Alt: TPIC44L02DB) RoHS: Not Compliant Min Qty: 360 Container: Tube	Americas - 0	360:$1.0209 480:$0.9719 840:$0.9389 1800:$0.9079 3600:$0.8829
TPIC44L02DB DISTI # TPIC44L02DB	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP (Alt: TPIC44L02DB) RoHS: Not Compliant Min Qty: 60	Europe - 0	60:€1.2029 120:€1.0649 240:€0.9539 360:€0.9069 600:€0.8649
TPIC44L02DBR DISTI # TPIC44L02DBR	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP - Tape and Reel (Alt: TPIC44L02DBR) RoHS: Not Compliant Min Qty: 2000 Container: Reel	Americas - 0	2000:$1.0209 4000:$0.9719 8000:$0.9389 12000:$0.9079 20000:$0.8829
TPIC44L02DBR DISTI # TPIC44L02DBR	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP (Alt: TPIC44L02DBR) RoHS: Not Compliant Min Qty: 1	Europe - 0	1:€1.2029 10:€1.1299 25:€1.0649 50:€1.0069 100:€0.9539 500:€0.9069 1000:€0.8649
TPIC44L02DBG4 DISTI # TPIC44L02DBG4	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP - Rail/Tube (Alt: TPIC44L02DBG4) RoHS: Compliant Min Qty: 360 Container: Tube	Americas - 0	360:$1.0209 480:$0.9719 840:$0.9389 1800:$0.9079 3600:$0.8829
TPIC44L02DBG4 DISTI # TPIC44L02DBG4	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP (Alt: TPIC44L02DBG4) RoHS: Compliant Min Qty: 60	Europe - 0	60:€1.2029 120:€1.0649 240:€0.9539 360:€0.9069 600:€0.8649
TPIC44L02DBRG4 DISTI # TPIC44L02DBRG4	4-Channel Serial and Parallel Low-Side Pre-Fet Driver 24-Pin SSOP (Alt: TPIC44L02DBRG4) RoHS: Compliant Min Qty: 2000	Europe - 0
TPIC44L02DB	4-Channel Serial/Parallel Low-Side Pre-FET Driver	4080	1000:$0.8000 750:$0.8700 500:$1.0600 250:$1.2700 100:$1.3700 25:$1.5800 10:$1.7000 1:$1.8900
TPIC44L02DB DISTI # 595-TPIC44L02DB	Gate Drivers 4Ch Ser/Para Low- Side Pre-FET Drvr RoHS: Compliant	0	360:$1.4100 540:$1.2400 1020:$1.0300 2520:$0.9510 5040:$0.9160
TPIC44L02DBRG4 DISTI # 595-TPIC44L02DBRG4	Gate Drivers 4Ch Ser/Para Low Side Pre-FET Driver RoHS: Compliant	0	2000:$0.9720 4000:$0.9360
TPIC44L02DBR DISTI # 595-TPIC44L02DBR	Gate Drivers 4Ch Ser/Para Low- Side Pre-FET Drvr RoHS: Compliant	0	2000:$0.9510 4000:$0.9160
TPIC44L02DBG4 DISTI # 595-TPIC44L02DBG4	Gate Drivers 4Ch Ser/Para Low Side Pre-FET Driver RoHS: Compliant	0	60:$1.4100 360:$1.4100 540:$1.2400 1020:$1.0300 2520:$0.9510 5040:$0.9160
TPIC44L02DB	Buffer/Inverter Based MOSFET Driver, PDSO24 RoHS: Compliant	26877	1000:$0.9200 500:$0.9700 100:$1.0100 25:$1.0500 1:$1.1300
TPIC44L02DBR	Buffer/Inverter Based MOSFET Driver, PDSO24 RoHS: Compliant	34000	1000:$0.9200 500:$0.9700 100:$1.0100 25:$1.0500 1:$1.1300

Image	Part #	Description
	Mfr.#: TPIC46L02DB OMO.#: OMO-TPIC46L02DB	Gate Drivers 6Ch Ser/Para Low- Side Pre-FET Drvr
	Mfr.#: TPIC44L02DB OMO.#: OMO-TPIC44L02DB	Gate Drivers 4Ch Ser/Para Low- Side Pre-FET Drvr
	Mfr.#: TPIC44L01DBRG4 OMO.#: OMO-TPIC44L01DBRG4	Gate Drivers 4Ch Ser/Para Low Side Pre-FET Driver
	Mfr.#: TPIC43T01DA OMO.#: OMO-TPIC43T01DA	Motor / Motion / Ignition Controllers & Drivers 3 Phase Brushless MotorRPMController
	Mfr.#: TPIC46L01DBG4 OMO.#: OMO-TPIC46L01DBG4-TEXAS-INSTRUMENTS	IC DRIVER PRE FET 6 CHAN 28-SSOP
	Mfr.#: TPIC44H01DAG4 OMO.#: OMO-TPIC44H01DAG4-TEXAS-INSTRUMENTS	IC 4-CH HIGH-SIDE DRVR 32-TSSOP
	Mfr.#: TPIC46L02DBG4 OMO.#: OMO-TPIC46L02DBG4-TEXAS-INSTRUMENTS	IC DRIVER PRE FET 6 CHAN 28SSOP
	Mfr.#: TPIC46L01DB OMO.#: OMO-TPIC46L01DB-TEXAS-INSTRUMENTS	Gate Drivers 6ChSerial/Parallel LoSidePreFETDrv
	Mfr.#: TPIC46L02DBR OMO.#: OMO-TPIC46L02DBR-TEXAS-INSTRUMENTS	Gate Drivers 6Ch Ser/Para Low- Side Pre-FET Drv
	Mfr.#: TPIC44H01 OMO.#: OMO-TPIC44H01-1190	New and Original