Technical Data Sheet
RPC-2.92
Straight Jack PCB
Economic Solderless
Connector
02K721-40MS3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
2 / 2
Dieses Dokument ist urheberrechtlich geschützt
● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
RF_35/05.10/6.1
f(GHz)
Electrical data
Impedance 50 Ω
Frequency DC to 40 GHz
Return loss ≥ 26 dB, DC to 26.5 GHz
≥ 23 dB, 26.5 GHz to 40 GHz
Insertion loss ≤ 0.04 x
dB
Insulation resistance ≥ 5 GΩ
Center contact resistance ≤ 3.0 mΩ
Outer contact resistance ≤ 2.0 mΩ
Test voltage 750 V rms
Working voltage 250 V rms
RF-leakage ≥ 100 dB up to 1 GHz
- Connector only, VSWR in application depends decisive on PCB layout -
Mechanical data
Mating cycles ≥ 500
Mating force PCB side ≤ 23 N
Center contact captivation ≥ 20 N
Coupling test torque 1.70 Nm
Recommended torque 0.80 Nm to 1.10 Nm
Environmental data
Storage temperature range -40°C to +85°C
Operating temperature range -0°C to +85°C
Thermal shock MIL-STD-202, Method 107, Condition B
Corrosion MIL-STD-202, Method 101, Condition B
Vibration MIL-STD-202, Method 204, Condition D
Shock MIL-STD-202, Method 213, Condition I
Moisture resistance MIL-STD-202, Method 106
RoHS compliant
Accessories
Available Screws DIN 7985-H-A2 UNF 0-80 (cylinder head screw) for different PCB thickness.
3/16” length = Standard (already included with the connector) DIN7985-H-A2 UNF 0-80x3/16
1/4” length = Optional (PCB thickness min. 1.8 mm to max. 4.2 mm) DIN7985-H-A2 UNF 0-80x1/4
5/16” length = Optional (PCB thickness min. 3.2 mm to max. 5.7 mm) DIN7985-H-A2 UNF 0-80x5/16
3/8” length = Optional (PCB thickness min. 4.8 mm to max. 7.5 mm) DIN7985-H-A2 UNF 0-80x3/8
7/16” length = Optional (PCB thickness min. 6.4 mm to max. 8.9 mm) DIN7985-H-A2 UNF 0-80x7/16
Tooling
N/A
Weight
2.2 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
F. Reiner 16.02.16 M. Moder 26.03.17 a00 18-s133 M.Ruf 26.03.18
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improv
products, we reserve the right to make changes judged to be necessary.
