OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APHB1608LQBDCGKC

P1-P3P4-P6
SPEC NO: DSAO4519 REV NO: V.1B DATE: AUG/01/2015 PAGE: 1 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203011302
1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT
LED
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APHB1608LQBDCGKC
Blue
Green
Features
z 1.6mmX0.8mm SMD LED, 0.5mm thickness.
z Compatible with reflow soldering.
z Available in various color combination.
z Package: 2000pcs / reel .
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z Low current IF=2mA operating.
z RoHS compliant.
Descriptions
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z The Green source color devices are made with AlGaInP
on GaAs substrate Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAO4519 REV NO: V.1B DATE: AUG/01/2015 PAGE: 2 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203011302
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 2mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APHB1608LQBDCGKC
Blue (InGaN)
Water Clear
6 12
Green (AlGaInP) 1.2 3
130
°
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Blue
Green
460
574
nm I
F=2mA
λD [1] Dominant Wavelength
Blue
Green
465
570
nm I
F=2mA
Δλ1/2 Spectral Line Half-width
Blue
Green
25
20
nm I
F=2mA
C Capacitance
Blue
Green
100
15
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Blue
Green
2.65
1.9
3
2.1
V I
F=2mA
I
R Reverse Current
Blue
Green
50
10
uA V
R = 5V
Min.
2.2
1.5
Parameter Blue Green Units
Power dissipation 90 63 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 150 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM) 250 - V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
SPEC NO: DSAO4519 REV NO: V.1B DATE: AUG/01/2015 PAGE: 3 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203011302
APHB1608LQBDCGKC
Blue
P1-P3P4-P6

APHB1608LQBDCGKC

Mfr. #:
Buy APHB1608LQBDCGKC
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 1.6x0.8MM LOW CU BLUE/GREEN SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet