3M
™
MicroTouch
™
System SCT7650EX Specifications
System Performance
Light Transmission 86.5% (±2%)
Input Method Finger input
Accuracy
>
99% of true position
Resolution 16k x 16k (maximum resolution)
Linearization Factory linearized
Tail Connection Solder-less design
Electronics (3M MicroTouch Controller EX)
Communication USB and Serial
Dimensions 1.3" (33.02 mm) x 2.4" (60.96 mm) REF
Operating Current 75 mA (typical)
Sleep Current
<
500 uA
Power Connection USB BUS (5V) or 5V/12V Serial
Connectors 5-pin AMP (Touch side)
5-pin or 7-pin Molex (COM side)
ESD ±8KV Contact, ±30KV Air
Point Speed (PPS) 200 pps (typical)
Minimum Touch Time < 5.4 ms
MTBF
>
700,000 hours
3M Touch Systems
Subsidiary of 3M Company
501 Grifn Brook Park Drive
Methuen, MA 01844
U.S.A.
1-888-659-1080
www.3M.com/touch
RoHS Directive compliant: RoHS 2011/65/EU means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU
RoHS Directive 2011/65/EU, unless the substance is in an application that is exempt under EU RoHS. The MCVs are by weight in homogeneous materials. This information represents
3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. (3/13)
IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems’ Products and software are warranted to meet their pub-
lished specifications from the date of shipment and for the period stated in the specification. 3M Touch Systems makes no additional warranties, express or implied, includ-
ing but not limited to any implied warranties of merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products
and software are fit for User’s particular purpose and suitable for its method of production, including intellectual property liability for User’s application. If the Product, software
or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch Systems’ sole obligation and User’s and Purchaser’s exclusive remedy, will be, at 3M
Touch Systems’ option, to repair or replace that Product quantity or software mediator to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Sys-
tems’ warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or
assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or software for any loss or
damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted. (7/02)
3M, MicroTouch, and ClearTek are trademarks of 3M Company. Printed in USA © 3M 2013 SCT7650EX -0513
Reliability
Surface Obstructions Withstands most surface contaminants
Chemical Resistance ASTM-D-1308-02 and ASTM-F-1598-95
Impact Resistance Steel ball drop test UL 60950
Liquid Resistance Liquids on screen do not impede touch
performance
Operating Temperature -40º C to 70º C
Storage Temperature -50º C to 85º C
Humidity Up to 90% RH from 0º C to 35º C,
non-condensing
Mechanical
Glass Thickness 0.298" (7.57 mm)
Display Size Supported 10.4" (264.16 mm) to 32" (812.8 mm)
(standard and wide formats)
Surface Scratch Hardness MoHS 7 or higher to induce a
functional failure
Scratch Resistance Proprietary top coat
Sealing NEMA 4X / IP66
Gasketing Complete water-resistant seal compatible
Cleaning Water, isopropyl alcohol, or similar
non-abrasive cleaners
RoHS Directive compliant Yes
System Warranty
5 years
