SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER TEMPERATURE
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
AC CURRENT (Typ.)
1500ms, 80ms/230VAC 3100ms, 80ms/115VAC at full load
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
6A/115VAC 2.6A/230VAC
30A/115VAC 50A/230VAC
<2mA / 240VAC
5.7 ~ 7V 13.5 ~ 16V
105 ~ 130% rated output power
17 ~ 21V 27.8 ~ 32.4V 53 ~ 64.8V
Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover
Protection type : Shut down o/p voltage, re-power to recover
Shut down o/p voltage with auto-recovery
-40 ~ +85 , 10 ~ 95% RH℃
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
129.8K hrs min. MIL-HDBK-217F (25 )℃
254*127*41mm (L*W*H)
1.6Kg; 6pcs/10.6Kg/0.7CUFT
90%85%
0.95/230VAC 0.98/115VAC at full load
20ms/230VAC 20ms/115VAC at full load
90% 89% 90%
±1.0% ±1.0% ±1.0% ±1.0%
±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
±2.0%
±2.0%
±2.0% ±2.0% ±2.0% ±2.0%
80mVp-p
4.5 ~ 5.5V
100mVp-p
10.8 ~ 13.2V
100mVp-p
13.5 ~ 16.5V
150mVp-p
21.6 ~ 27V
150mVp-p
43.2 ~ 52.8V
5V
80A
0 ~ 60A
0 ~ 80A
300W
400W
12V
42A
0 ~ 33A
0 ~ 42A
396W
504W
15V
33.5A
0 ~ 27A
0 ~ 33.5A
405W
502.5W
24V
21A
0 ~ 17A
0 ~ 21A
408W
504W
48V
10.5A
0 ~ 8.5A
0 ~ 10.5A
408W
504W
USP-500-5 USP-500-12 USP-500-15 USP-500-24 USP-500-48
File Name:USP-500-SPEC 01-152018-
500W Single Output with PFC Function
Universal AC input / Full range
Built in active PFC circuit compliance to EN61000-3-2
Protections: Short circuit / Overload / Over voltage / Over temperature
Free air convection for 400W and 500W with 23.5CFM forced air
High power density 6.2w/in
3
AC input active surge current limiting
U-bracket low profile:41mm
Current sharing(1+1) for 24V and 48V models (Optional)
Built-in remote ON-OFF control
Built-in remote sense function
Built in DC OK active signal
3 years warranty
■
Features :
USP-500 series
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
ENVIRONMENT
PROTECTION
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
CURRENT RANGE (23.5CFM FAN)
RATED POWER (convection)
CURRENT RANGE (convection)
RATED POWER (23.5CFM FAN)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
SAFETY &
EMC
(Note 4)
UL60950-1, TUV EN60950-1 approved, EAC TP TC 004
-20 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
±℃ ℃0.03%/ (0 ~ 50 )
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A, EAC TP TC 020
FUNCTION
DC-OK SIGNAL
REMOTE ON/OFF CONTROL
RC+/RC-: 0~0.8V power on ; 4~10V power off
PSU turn on : 3.3V ~ 5.6V ; PSU turn off: 0 ~ 1V
EMC IMMUNITY
EMC EMISSION
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
