© Semiconductor Components Industries, LLC, 2016
November, 2016 − Rev. 31
1 Publication Order Number:
CAT24C01/D
CAT24C01, CAT24C02,
CAT24C04, CAT24C08,
CAT24C16
1-Kb, 2-Kb, 4-Kb, 8-Kb and
16-Kb I
2
C CMOS Serial
EEPROM
Description
The CAT24C01/02/04/08/16 are 1−Kb, 2−Kb, 4−Kb, 8−Kb and
16−Kb respectively CMOS Serial EEPROM devices organized
internally as 8/16/32/64 and 128 pages respectively of 16 bytes each.
All devices support both the Standard (100 kHz) as well as Fast
(400 kHz) I
2
C protocol.
Data is written by providing a starting address, then loading 1 to 16
contiguous bytes into a Page Write Buffer, and then writing all data to
non−volatile memory in one internal write cycle. Data is read by
providing a starting address and then shifting out data serially while
automatically incrementing the internal address count.
External address pins make it possible to address up to eight
CAT24C01 or CAT24C02, four CAT24C04, two CAT24C08 and one
CAT24C16 device on the same bus.
Features
Supports Standard and Fast I
2
C Protocol
1.7 V to 5.5 V Supply Voltage Range
16−Byte Page Write Buffer
Hardware Write Protection for Entire Memory
Schmitt Triggers and Noise Suppression Filters on I
2
C Bus Inputs
(SCL and SDA)
Low power CMOS Technology
More than 1,000,000 Program/Erase Cycles
100 Year Data Retention
Industrial and Extended Temperature Range
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
www.onsemi.com
SOIC−8
W SUFFIX
CASE 751BD
TSOT−23
TD SUFFIX
CASE 419AE
PDIP−8
L SUFFIX
CASE 646AA
TSSOP−8
Y SUFFIX
CASE 948AL
MSOP−8
Z SUFFIX
CASE 846AD
TDFN−8*
VP2 SUFFIX
CASE 511AK
UDFN8−EP
HU4 SUFFIX
CASE 517AZ
WLCSP−4***
C4A SUFFIX
CASE 567DC
WLCSP−5***
C5A SUFFIX
CASE 567DD
US8**
US SUFFIX
CASE 493
See detailed ordering and shipping information in the package
dimensions section on page 21 of this data sheet.
ORDERING INFORMATION
WLCSP−4***
C4U SUFFIX
CASE 567NX
* The TDFN (VP2) package is not recommended fo
r
new designs.
** Preliminary, please contact factory for availability.
*** WLCSP are available for the CAT24C04,
CAT24C08 and CAT24C16 only.
CAT24C01, CAT24C02, CAT24C04, CAT24C08, CAT24C16
www.onsemi.com
2
PIN CONFIGURATIONS AND MARKING INFORMATION
SCL
WP
CAT24Cxx
Figure 1. Functional Symbol
V
SS
SDA
V
CC
A
2
, A
1
, A
0
Table 1. PIN FUNCTION
Pin Name
Function
A0, A1, A2 Device Address Input
SDA Serial Data Input/Output
SCL Serial Clock Input
WP Write Protect Input
V
CC
Power Supply
V
SS
Ground
NC No Connect
The exposed pad for the TDFN/UDFN packages can be left floating
or connected to Ground.
V
CC
WP
SDA
V
SS
SCL
1
2
3
5
4
TSOT−23 (TD) (Top View)
*** WLCSP are available for the CAT24C04,
CAT24C08 and CAT24C16 only.
TOP MARKING FOR WLCSP
X = Specific Device
X = Code
4 or R = 24C04
8 or T = 24C08
6 or V = 24C16
Y = Production Year (Last Digit)
M = Production Month (1−9, O, N, D)
W = Production Week
WLCSP−4
(C4A)
WLCSP−5
WLCSP−4*** WLCSP−5***
(Top Views)
WP SCL
SDA
SCL SDA
Pin 1
A
12312
B
C
A
B
Pin 1
V
CC
V
SS
V
CC
V
SS
X X
Y M Y M
Pin 1
(Ball Down)
Pin 1
SDA
SCL
WP
V
CC
V
SS
1
2
3
4
8
7
6
5
CAT24C__
16 / 08 / 04 / 02 / 01
NC
////
NC NC
NC NC
NC
A
0
A
0
A
1
A
1
A
1
A
2
A
2
A
2
A
2
////
////
PDIP (L), SOIC (W), TSSOP (Y), MSOP (Z), US (US)**,
* The TDFN (VP2) package is not recommended for new designs.
TDFN, (VP2)*, UDFN−EP (HU4) (Top View)
** Preliminary, please contact factory for availability.
WLCSP−4
(C4U)
X
Y W
Pin 1
CAT24C01, CAT24C02, CAT24C04, CAT24C08, CAT24C16
www.onsemi.com
3
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameters Ratings Units
Storage Temperature −65 to +150 °C
Voltage on any pin with respect to Ground (Note 1) −0.5 to +6.5 V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. During input transitions, voltage undershoot on any pin should not exceed −1 V for more than 20 ns. Voltage overshoot on pins A
0
, A
1
, A
2
and WP should not exceed V
CC
+ 1 V for more than 20 ns, while voltage on the I
2
C bus pins, SCL and SDA, should not exceed the absolute
maximum ratings, irrespective of V
CC
.
Table 3. RELIABILITY CHARACTERISTICS (Note 2)
Symbol Parameter Min Units
N
END
(Note 3) Endurance 1,000,000 Program / Erase Cycles
T
DR
Data Retention 100 Years
2. These parameters are tested initially and after a design or process change that affects the parameter according to appropriate AEC−Q100
and JEDEC test methods.
3. Page Mode, V
CC
= 5 V, 25°C.
Table 4. D.C. OPERATING CHARACTERISTICS
(V
CC
= 1.8 V to 5.5 V, T
A
= −40°C to +125°C and V
CC
= 1.7 V to 5.5 V, T
A
= −40°C to +85°C, unless otherwise specified.)
Symbol
Parameter Test Conditions Min Max Units
I
CCR
Read Current Read, f
SCL
= 400 kHz 1 mA
I
CCW
Write Current Write, f
SCL
= 400 kHz 2 mA
I
SB
Standby Current All I/O Pins at GND or V
CC
T
A
= −40°C to +85°C
V
CC
3.3 V
1 mA
T
A
= −40°C to +85°C
V
CC
> 3.3 V
3
T
A
= −40°C to +125°C 5
I
L
I/O Pin Leakage Pin at GND or V
CC
2
mA
V
IL
Input Low Voltage −0.5 0.3 x V
CC
V
V
IH
Input High Voltage
A
0
, A
1
, A
2
and WP 0.7 x V
CC
V
CC
+ 0.5
V
SCL and SDA 0.7 x V
CC
5.5
V
OL
Output Low
Voltage
V
CC
> 2.5 V, I
OL
= 3 mA 0.4
V
CC
< 2.5 V, I
OL
= 1 mA 0.2
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.

CAT24C16HU4I-GT3

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
EEPROM 16KB I2C SER EEPROM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union