For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
Pulse
Northern Europe
3 Huxley Road
Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
Pulse
Southern Europe
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
Pulse North Asia
3F-4, No. 81, Sec. 1
Hsin Tai Wu Road
Hsi-Chih
Taipei Hsien
Taiwan
TEL: 886 2 26980228
FAX: 886 2 26980948
Pulse
China Headquarters
No. 1
Industrial District
Changan, Dongguan
China
TEL: 86 769 5538070
FAX: 86 769 5538870
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2005. Pulse Engineering, Inc. All right reserved.
Pulse North China
Room 1002
No. 819
Nanjing West Rd
Shanghai
China
TEL: 86 21 32181071
FAX: 86 21 32181396
www.pulseeng.com
P641.A (8/05)
Notes from Tables
1. The rated current as listed is either the saturation current @ 25°C or the
heating current depending on which value is lower.
2. The saturation current Isat is the current which causes the inductance to
drop by 10% typical at an ambient temperature of 25°C. This current is
determined by placing the component in the specified ambient environ-
ment and applying a short duration pulse current (to eliminate self-heating
effects) to the component.
3. The heating current Idc is the dc current which causes the temperature
rise of the part to increase by approximately 40°C. This current is
determined by mounting the component on a typical application PCB and
applying the current to the device for 30 minutes.
4. Optional Tape and Reel packaging can be ordered by adding a "T" suffix
to the part number (i.e. PF0698.103NL becomes PF0698.103NLT). Pulse
complies to industry standard tape and reel specification EIA481.
SMT POWER INDUCTORS
Unshielded Drum Core - PF0698NL Series
