110-402 Datasheet 110-402 | P1-P3

3SP_O3_20 C Package 110-402

January 2017

PRODUCTION DATA information is current as of publication date.

Sensors standard warranty. Production processing does not

necessarily include testing of all parameters.

15x15 O3 Sensor 20 ppm C Package 110-402

BENEFITS

• Small Size with Low Profile (20x20x3 mm)

• Long Life (10 years expected life)

• Fast Response (< 15 seconds)

• Low Power Consumption

• Individually Calibrated (NIST Traceable)

• ROHS Compliant

APPLICATIONS

• Air Quality Monitoring

• Industrial Safety

• Air Purification Control

DESCRIPTION

SPEC’s printed sensors offer the performance of the best quality electrochemical sensors at a fraction of

the price. SPEC’s printed sensors are also ultra-thin, offering easy integration into wireless, portable, and

networked solutions. These sensors are ideal for health, environmental, industrial and residential

monitoring, because of their high performance, low cost and small size.

Measurement Range

0 to 20 ppm

Lower Detectable Limit

< 20 ppb (instrumentation dependent)

Repeatability

< +/- 3 % of reading

Response Time

< 15 seconds typical

Sensitivity @ 0 mV bias

-32 +/- 10 nA/ppm

Expected Operating Life

> 5 years (10 years @ 23+/-3C; 40+/-10% RH)

Operating Temperature Range

-30 to 50 C (-20 to 40 C continuous)

Operating Humidity Range – non-condensing

0 to 100% RH (15 to 95% continuous)

Power Consumption

10 to 50 uW (circuit & ambient O3 dependent)

3SP_O3_20 C Package 110-402

January 2017

PRODUCTION DATA information is current as of publication date.

Sensors standard warranty. Production processing does not

necessarily include testing of all parameters.

CROSS SENSITIVITY

Gas/Vapor

Concentration

Typical Response PPM O3

Methane

500 ppm

< 0.05

Nitrogen Dioxide

10 ppm

Hydrogen Sulfide

25 ppm

-12.5

Carbon Monoxide

400 ppm

< 0.05

Ozone

5 ppm

Chlorine

10 ppm

n-Heptane

500 ppm

-0.2

TEMPERATURE EFFECT

Temperature fluctuations have a predictable, easily compensated effect on the sensor signal. The figures

at below shows the typical Temperature dependency the output and baseline of 3SP_O3_20 sensor.

This information was collected under constant humidity of 40-50 % RH. It is a very uniform and

repeatable effect, easily compensated for in hardware or software.

3SP_O3_20 C Package 110-402

January 2017

PRODUCTION DATA information is current as of publication date.

Sensors standard warranty. Production processing does not

necessarily include testing of all parameters.

IMPORTANT PRECAUTIONS

All sensor designs are made for air monitoring @ 1 atm +/- 0.2 atm. Because applications of use and

device implementation are outside our control, SPEC Sensors cannot guarantee performance in a given

device or application, and disclaims any and all liability therefore. Customers should test under their

own conditions to ensure the sensors are suitable for their requirements.

Contact the factory to discuss specific concerns that might damage the sensor performance or life.

 Condensation and Water (1)

 Salt Water Contamination (1)

 High Temperature Operation (> 70C) for more than 1 month

 Low Humidity Operation (< 15% RH) for more than 3 months

 High Bias voltage

 Highly contaminated air over a prolonged period

 High levels of particles or soot (unless proper filtering is provided)

(1) Use of porous PTFE membrane or filter cap may address this concern)

MARKING INFORMATION

Sensors have serial numbers printed with individual NIST Traceable calibration data printed on each

sensor. (CO version shown)

P1-P3 P4-P5

110-402

Mfr. #:

Buy 110-402

Manufacturer:

Altech

Description:

Electrical Enclosures 3.70 x 2.56 x 2.24 Polystyrene Gray

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

110-402