13©2018 Integrated Device Technology, Inc. February 12, 2018
VersaClock
®
6E - 5P49V60, 5P49V6965 and 5P49V6975 Evaluation Board User Guide
1. The default configuration of the evaluation board is the HCSL termination scheme. This scheme allows for quick measurements of every
logic type without modification of the evaluation board. When using the unmodified board with equipment that has AC coupled inputs, like
a spectrum analyzer or phase noise test set, use a 3dB or 6dB attenuator to facilitate a DC path to ground and to allow the output driver to
toggle. This is only needed with LVPECL and HCSL logic.
Table 4. Termination Options for Output 2
Signal Type Series Resistors: R129, R130 150 Pull-down: R108, R82, R83 Series Capacitor: C9, C10
LVPECL 0 Installed (see Figure 11)0.1μF
HCSL
1
33 Not installed 0 (short)
LVCMOS 33 Not installed 0.1μF
LVDS 0 Not installed 0.1μF
Table 5. Termination Options for Output 3
Signal Type Series Resistors: R37, R43 150 Pull-down: R45, R46, R144 Series Capacitor: C11, C13
LVPECL 0 Installed (see Figure 11)0.1μF
HCSL
1
33 Not installed 0 (short)
LVCMOS 33 Not installed 0.1μF
LVDS 0 Not installed 0.1μF
Table 6. Termination Options for Output 4
Signal Type Series Resistors: R39, R44 150 Pull-down: R49, R50, R143 Series Capacitor: C12, C14
LVPECL 0 Installed (see Figure 11)0.1μF
HCSL
1
33 Not installed 0 (short)
LVCMOS 33 Not installed 0.1μF
LVDS 0 Not installed 0.1μF
14©2018 Integrated Device Technology, Inc. February 12, 2018
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved.
Tech Support
www.IDT.com/go/support
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/sales
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.IDT.com
VersaClock
®
6E - 5P49V60, 5P49V6965 and 5P49V6975 Evaluation Board User Guide
Ordering Information
Revision History
Orderable Part Number Description
5P49V60-EVK 5P49V60 evaluation board.
5P49V6965-EVK 5P49V6965 evaluation board.
5P49V6975-EVK 5P49V6975 evaluation board.
Revision Date Description of Change
February 12, 2018 Added references to 5P49V60.
December 15, 2017 Initial release.

5P49V6975-EVK

Mfr. #:
Manufacturer:
IDT
Description:
Clock & Timer Development Tools VersaClock 6E w/ INT Crystal EVK
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet