S2008DRP Datasheet S2025L, S2065KTP, S2016R | P1-P3

Thyristor Product Catalog +1 972-580-7777

Selected Packages

U.L. RECOGNIZED

File #E71639

SCRs

(1 A to 70 A)

General Description

The Teccor line of thyristor SCR semi-conductors are half-wave,

unidirectional, gate-controlled rectifiers which complement Tec-

cor's line of sensitive SCRs. Teccor offers devices with ratings of

1 A to 70 A and 200 V to 1000 V, with gate sensitivities from

10 mA to 50 mA. If gate currents in the 12 µA to 500 µA ranges

are required, see “Sensitive SCRs” section of this catalog.

Three packages are offered in electrically isolated construction

where the case or tab is internally isolated to allow the use of

low-cost assembly and convenient packaging techniques.

The Teccor line of SCRs features glass-passivated junctions to

ensure long-term reliability and parameter stability. Teccor’s

glass offers a rugged, reliable barrier against junction contamina-

tion.

Variations of devices covered in this data sheet are available for

custom design applications. Consult the factory for more informa-

tion.

Features

•RoHS Compliant

• Electrically-isolated package

• High voltage capability — 200 V to 1000 V

• High surge capability — up to 950 A

• Glass-passivated chip

Compak SCR

• Surface mount package — 1 A series

• New small profile three-leaded Compak package

• Packaged in embossed carrier tape with 2,500

devices per reel

• Can replace SOT-223

TO-92

*TO-218

TO-202

*TO-218X

3-lead

Compak

TO-252

D-Pak

TO-251

V-Pak

*TO-220

TO-263

Pak

SCRs Data Sheets

+1 972-580-7777 Thyristor Product Catalog

Specific Test Conditions

di/dt — Maximum rate-of-rise of on-state current; I

= 150 mA with

≤ 0.1 µs rise time

dv/dt — Critical rate of applied forward voltage

t — RMS surge (non-repetitive) on-state current for period of 8.3 ms

for fusing

DRM

and I

RRM

— Peak off-state forward and reverse current at V

DRM

and

RRM

— dc gate trigger current; V

= 12 V dc; R

= 60 Ω for 1 to 16 A

devices and 30 Ω for 20 to 70 A devices

— Peak gate current

— dc holding current; gate open

— Maximum on-state current

TSM

— Peak one-cycle forward surge current

G(AV)

— Average gate power dissipation

— Peak gate power dissipation

— Gate controlled turn-on time; gate pulse = 100 mA; minimum

width = 15 µs with rise time ≤ 0.1 µs

— Circuit commutated turn-off time

DRM

and V

RRM

— Repetitive peak off-state forward and reverse voltage

— DC gate trigger voltage; V

= 12 V dc; R

= 60 Ω for 1 to 16 A

devices and 30 Ω for 20 to 70 A devices

— Peak on-state voltage at maximum rated RMS current

General Notes

• All measurements are made at 60 Hz with a resistive load at an

ambient temperature of +25 °C unless otherwise specified.

• Operating temperature range (T

) is -65 °C to +125 °C for TO-92

devices and -40 °C to +125 °C for all other packages.

• Storage temperature range (T

) is -65 °C to +150 °C for TO-92

devices, -40 °C to +150 °C for TO-202 and TO-220 devices, and

-40 °C to +125 °C for all others.

• Lead solder temperature is a maximum of 230 °C for 10 seconds

maximum; ≥1/16" (1.59 mm) from case.

• The case temperature (T

) is measured as shown on dimensional

outline drawings in the “Package Dimensions” sectionof this

catalog.

TYPE

Part Number

DRM

& V

RRM

Isolated Non-isolated

TO-92

TO-220 TO-202

TO-220

TO-251

V-Pak Compak

TO-252

D-Pak

(1) (2) (15)

Amps

Volts

(4)

mAmps

See “Package Dimensions” section for variations. (11)

T(RMS)

T(AV)

MAX MAX MIN MIN MAX

S201E S2N1 1 0.64 200 1 10

S401E S4N1 1 0.64 400 1 10

S601E S6N1 1 0.64 600 1 10

S2006L S2006F1 S2006V S2006D 6 3.8 200 1 15

S4006L S4006F1 S4006V S4006D 6 3.8 400 1 15

S6006L S6006F1 S6006V S6006D 6 3.8 600 1 15

S8006L S8006V S8006D 6 3.8 800 1 15

SK006L SK006V SK006D 6 3.8 1000 1 15

S2008L S2008F1 S2008R S2008V S2008D 8 5.1 200 1 15

S4008L S4008F1 S4008R S4008V S4008D 8 5.1 400 1 15

S6008L S6008F1 S6008R S6008V S6008D 8 5.1 600 1 15

S8008L S8008R S8008V S8008D 8 5.1 800 1 15

SK008L SK008R SK008V SK008D 8 5.1 1000 1 15

10 A

S2010L S2010F1 S2010R S2010V S2010D 10 6.4 200 1 15

S4010L S4010F1 S4010R S4010V S4010D 10 6.4 400 1 15

S6010L S6010F1 S6010R S6010V S6010D 10 6.4 600 1 15

S8010L S8010R S8010V S8010D 10 6.4 800 1 15

SK010L SK010R SK010V SK010D 10 6.4 1000 1 15

12 A

S2012R S2012V S2012D 12 7.6 200 1 20

S4012R S4012V S4012D 12 7.6 400 1 20

S6012R S6012V S6012D 12 7.6 600 1 20

S8012R S8012V S8012D 12 7.6 800 1 20

SK012R SK012V SK012D 12 7.6 1000 1 20

Data Sheets SCRs

Thyristor Product Catalog +1 972-580-7777

Electrical Specification Notes

(1) See Figure E6.5 through Figure E6.16 for current rating at

specified operating case temperature.

(2) See Figure E6.1 and Figure E6.2 for free air current rating.

(3) See Figure E6.19 and Figure E6.20 for instantaneous on-state

current versus on-state voltage (typical).

(4) See Figure E6.18 for I

versus T

(5) See Figure E6.17 for I

versus T

(6) For more than one full cycle rating, see Figure E6.23.

(7) See Figure E6.22 for t

versus I

(8) See Figure E6.21 for V

versus T

(9) Test conditions are as follows:

•I

= 1 A for 1 A devices and 2 A for all other devices

• Pulse duration = 50 µs, dv/dt = 20 V/µs, di/dt = -10 A/µs for 1 A

devices, and -30 A/µs for other devices

•I

= 200 mA at turn-on

(10) See Figure E6.5 through Figure E6.10 for maximum allowable

case temperatures at maximum rated current.

(11) See package outlines for lead form configuration. When ordering

special lead forming, add type number as suffix to part number.

(12) Pulse width ≤10 µs

(13) Initial on-state current = 200 mA dc for 1 A through 16 A devices;

400 mA dc for 20 A through 70 A devices.

(14) T

= T

for test conditions in off state.

(15) The R, K, or M package rating is intended for high surge condition

use only and not recommended for ≥50 A rms continuous current

use since narrow pin lead temperature can exceed PCB solder

melting temperature. Teccor's J package or W package is

recommended for ≥50 A rms continuous current requirements.

(16) For various durations of an exponentially decaying current

waveform, see Figure E6.3 and Figure E6.4. (t

is defined as

5 time constants.)

(17) Minimum non-trigger V

at 125 °C is 0.2 V.

DRM

& I

RRM

G(AV)

TSM

dv/dt I

t di/dt

(14)

mAmps

(3)

Volts

(8)

(17)

Volts

(5) (13)

mAmps

(12)

Amps

(12)

Watts Watts

(6) (10)

Amps Volts/µSec

Amps

Sec Amps/µSec

(7)

µSec

(9) (10)

µSec

25 °C

100 °C

125 °C

25 °C

60/50 Hz

100 °C

125 °C

MAX MAX MAX MAX MIN MIN TYP MAX

0.01 0.2 0.5 1.6 1.5 30 1.5 15 0.3 30/25 40 20 3.7 50 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 300 225 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 250 200 41 100 2 35

0.02 3 1.6 1.5 30 2 20 0.5 100/83 100 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 300 225 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 250 200 41 100 2 35

0.02 3 1.6 1.5 30 2 20 0.5 100/83 100 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 350 250 41 100 2 35

0.01 0.2 0.5 1.6 1.5 30 2 20 0.5 100/83 300 225 41 100 2 35

0.02 0.5 1 1.6 1.5 30 2 20 0.5 100/83 250 200 41 100 2 35

0.02 3 1.6 1.5 30 2 20 0.5 100/83 100 41 100 2 35

0.01 0.5 1 1.6 1.5 40 2 20 0.5 120/100 350 250 60 100 2 35

0.01 0.5 1 1.6 1.5 40 2 20 0.5 120/100 300 225 60 100 2 35

0.02 0.5 1 1.6 1.5 40 2 20 0.5 120/100 250 200 60 100 2 35

0.02 3 1.6 1.5 40 2 20 0.5 120/100 100 60 100 2 35

P1-P3 P4-P6 P7-P9 P10-P12

S2008DRP

Mfr. #:

Buy S2008DRP

Manufacturer:

Littelfuse

Description:

SCRs 8A 200V

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

S2008DRP

S2008DRP

Products related to this Datasheet