SPEC NO: DSAF7020 REV NO: V.11A DATE: DEC/28/2015 PAGE: 2 OF 5
APPROVED: Wynec CHECKED: Joe Lee DRAWN: F.T.Liu ERP: 1351000373
Selection Guide
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (ucd) [1]
@ 10mA
Description
Min. Typ.
ACSC04-41SRWA-F01 Super Bright Red (GaAlAs) White Diffused
5600 14000
*1400 *3600
Common Cathode, Rt.
Hand Decimal.
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Red 655
nm I
F=10mA
λD [1] Dominant Wavelength Super Bright Red 640
nm I
F=10mA
Δλ1/2 Spectral Line Half-width Super Bright Red 20
nm I
F=10mA
C Capacitance Super Bright Red 45
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Red 1.8 2.5 V IF=10mA
I
R Reverse Current Super Bright Red
10 uA VR=5V
Parameter Values Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
