3M
™
Scotchlok
™
Closed End Connector
Nylon Insulated, Copper Insert, 722-N-A
2 of 2
Installation Information
For use on solid or stranded copper (AWG) wire only.
Instructions:
1. Strip all wires ½ inch.
2. Pre-twist wires before crimping.
3. Insert wires into connector.
4. Insert into proper tool station and crimp.
3M™ Scotchlok™ Crimp Station Tools: TH-440, 22-14 Insul.; TH-450, 26-14
Insul.
Barrel Crimp (Required)
Pre-twist wires before crimping.
Engineering/ 3M
™
Scotchlok
™
Closed End Connector, Nylon Insulated, Copper Insert 722-
Architectural N-A shall, electrically and mechanically, connect permanently to the pre-
Specifications stripped ends of two or more copper wires.
The closed end connector shall be a copper sleeve covered by a molded nylon,
skirted insulator of natural color.
Availability Please contact your local distributor; available from 3M.com/electrical [Where
to Buy] or call 1-800-245-3573.
Important Notice All statements, technical information, and recommendations related to 3M’s products are based on
information believed to be reliable, but the accuracy or completeness is not guaranteed. Before
using this product, you must evaluate it and determine if it is suitable for your intended application.
You assume all risks and liability associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any contrary statements contained on your
purchase order shall have no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; This product will be free from defects in material and manufacture at the time of purchase. 3M
Limited Liability: MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this
product is defective within the warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M product, regardless of the legal theory
asserted.
3M and Scotchlok are trademarks of 3M Company.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800 245 3573 Please recycle.
FAX 800 245 0329 © 3M 2008 All rights reserved.
www.3M.com/electrical 78-8127-6880-8_A
