OMO ElectronicOMO Electronic
Expand menu
0 Cart

RDS302424

P1-P2
TDK-Lambda
RDS30-24
SPECIFICATIONS
B027-01-01A
MODEL
ITEMS
1
Nominal Output Voltage
V
5
12
15
24
2
Maximum Output Current
A
3
Maximum Output Power
W
30.0
30.0
30.0
31.2
4
Efficiency (Typ)
(*1)
%
78
79
80
5
Input Voltage Range
-
18 - 32VDC
6
Input Current (Typ)
(*1)
A
7
Inrush Current (Typ)
(*1)
-
4.7A at Cold Start
8
Output Voltage Range
(*8)
V
4.5 - 5.5
10.8 - 13.2
13.5 - 16.5
21.6 - 26.4
9
Maximum Ripple
(*2)
mV
50
80
80
100
10
Maximum Ripple & Noise
(*2)
mV
100
170
200
290
11
Maximum Line Regulation
(*3)
mV
40
96
120
192
12
Maximum Load Regulation
(*4)
mV
100
100
100
200
13
Temperature Coefficient
-
Less than 0.02 %/
℃
14
Over Current Protection
(*5)
A
7.5 - 9.6
3.1 - 4.0
2.5 - 3.2
1.6 - 2.1
15
Over Voltage Protection
(*6)
V
6.0 - 7.5
15.0 - 18.0
17.6 - 22.5
28.0 - 36.0
16
Remote ON/OFF control
-
Possible
17
Parallel Operation
-
-
18
Series Operation
-
Possible
19
Operating Temperature
(*7)
-
-20 - +60°C (-20 - +50°C:100%, +60°C:70%)
20
Operating Humidity
-
20 - 95%RH (No Condensing)
21
Storage Temperature
-
-25 - +75°C
22
Storage Humidity
-
20 - 95%RH (No Condensing)
23
Cooling
-
Convection Cooling
24
Withstand Voltage
-
I/P - O/P, I/P - FG : 2kVAC (10mA) for 1min.,
O/P - CNT(RC) : 100VAC (100mA) for 1min.
25
Isolation Resistance
-
O/P - FG : 500VDC 100Mohm, O/P - CNT(RC) : 100VDC 10Mohm
26
Vibration
-
10 - 55Hz : 19.6m/s
2
, X,Y,Z 1hour each.
Designed to meet JIS E 3014-2-B
27
Shock
-
294m/s
2
(time : 6
±
3ms)
Designed to meet JIS E 3015-2-B
28
Safety
-
Approved by UL60950-1 & CSA60950-1,
Designed to meet EN60950-1
29
Conducted Emission
-
Designed to meet EN55011/EN55022-A, FCC-ClassA, VCCI-A
30
Radiated Emission
-
Designed to meet EN55011/EN55022-A, FCC-ClassA, VCCI-A
31
Immunity
-
Designed to meet IEC61000-4-2(Level 2,3), -4(Level 3), -8(Level 4)
32
Weight (Typ)
g
400
33
Size (W x H x D)
mm
38 x 95 x 130 ( Refer to Outline Drawing )
*Read instruction manual carefully, before using the power supply unit.
=NOTES=
*1.
At 24VDC, Ta=25°C, nominal output voltage and maximum output power.
*2.
Measure with JEITA RC-9131A probe, Bandwidth of scope :100MHz.
*3.
18 - 32VDC, constant load.
*4.
No load-Full load, constant input voltage.
*5.
OCP TYPE : Constant current limit with automatic recovery.
*6.
OVP circuit will shut the output down, manual reset (Re power on).
*7.
Ratings
- Derating at standard mounting. Refer to output derating curve(B027-01-02_).
- Load (%) is percent of maximum output power or maximum output current, whichever is greater.
*8.
At 24VDC Input.(Refer to instruction manual.)
1.6
RDS30-24-5 RDS30-24-12 RDS30-24-15 RDS30-24-24
TDK-Lambda
RDS30-24
OUTPUT DERATING
B027-01-02
*COOLING : CONVECTION COOLING
LOAD (%)
Ta (°C) MOUNTING A MOUNTING B
-20 - +40 100 100
100 70
60 70 -
50
OUTPUT DERATING CURVE
0
20
40
60
80
100
120
-20 -10 0 10 20 30 40 50 60 70 80
Ta (°C)
LOAD (%)
MOUNTING A
MOUNTING B
MOUNTING B MOUNTING C MOUNTING D MOUNTING EMOUNTING A
(STANDARD MOUNTING)
DON'T USE
P1-P2

RDS302424

Mfr. #:
Buy RDS302424
Manufacturer:
TDK-Lambda
Description:
Isolated DC/DC Converters 18-36Vin 24Vout 1.3A 31.2W
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet