4. Maximum Switching Rating / Output: 10 = 10.0A rms
20 = 20.0A rms
30 = 30.0A rms
Input Specifications
Engineering Data
Form: 1 Form A (SPST-NO).
Duty: Continuous.
Isolation: 4000V rms input-to-output-to-ground.
Insulation Resistance: 10
9
Ohms, minimum, at 500VDC.
Capacitance: 8.0 pf maximum (input to output).
Temperature Range:
Storage: –30°C to +100°C
Operating: –30°C to + 80°C
Case and Mounting: Refer to outline dimension drawing.
Termination:
Load & Control: Finger safe (IP20) screw clamps accepting
wire size up to #10 AWG (3 mm).
Ground: #10 screw with 5/16 in. hex/slottted head.
Installation Spacing: Minimum 0.8 in (20 mm) space between units.
Approximate Weight: 9.87 oz. (280g).
SSRK-240A20 SSRK-240A30 SSRK-600A30
SSRK-240D20 SSRK-240D30 SSRK-600D30
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Features
• Narrow (22.5mm), DIN mount design with integral heatsink.
• Choice of 10, 20 or 30A rms inverse-parallel connected SCR output.
• 24-240VAC and 48-660VAC output types.
• 3 - 32VDC, 4 - 32VDC or 90 - 280Vrms input control.
• 4000V rms optical isolation.
• Green LED input status indicator.
• Finger-safe (IP20) screw clamp terminals for load and control.
• Ground terminal.
Parameter Conditions AC Control Units
DC Control Units
240 V 600V
Control Voltage Range VIN @25°C 90 - 280 Vrms 3 -32 VDC 4 -32 VDC
Must Operate Voltage VIN(OP) (Min.) @25°C 90 Vrms 3 VDC 4 VDC
Must release Voltage VIN(REL) (Min.) @25°C 10 Vrms 1 VDC 1 VDC
Input Current Range(Typ.) @25°C 7.5mA @ 120 Vrms, 16mA @ 240 Vrms 18mA @ 5Vdc 9.5 - 30 mA
File E29244
Users should thoroughly review the technical data before selecting a
product part number. It is recommended that users also seek out the
pertinent approvals files of the agencies/laboratories and review them to
ensure the product meets the requirements for a given application.
10-30A DIN Mount Solid State Relay
With Paired SCR Output, Integral Heatsink
Typical Part Number
>
SSRK –600 A
1. Basic Series: SSRK = Slim Solid State Relay with Integral Heatsink for DIN Rail Mounting
2. Line Voltage: 240 = 24 - 240 VAC
600 = 48 - 660 VAC
3. Input Type & Voltage: A = 90 - 280 VAC
D = 3 - 32VDC for 240V / 4 - 32VDC for 600V
Ordering Information
30
Solid State Relay
SSRK Series
02-2018, Rev. 0218
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
