AN26014A
2
Ver. BEB
ABSOLUTE MAXIMUM RATINGS
*4V-0.3 to (V
CC
+ 0.3)CNT (Pin No.3)
*4V-0.3 to (V
CC
+ 0.3)OUT (Pin No.5)
*3V—IN (Pin No.1)
Input Voltage Range
—mA18I
CC
Supply current
*2°C–40 to +125T
j
Operating junction temperature
—V200MM (Machine Model)
*2°C–55 to +125T
stg
Storage temperature
—kV2HBM (Human Body Model)
ESD
NoteUnitRatingSymbolParameter
*2°C–20 to 70T
opr
Operating ambient temperature
*1V3.6V
CC
Supply voltage
Notes). This product may sustain permanent damage if subjected to conditions higher than the above stated absolute maximum rating.
This rating is the maximum rating and device operating at this range is not guaranteeable as it is higher than our stated
recommended operating range.
When subjected under the absolute maximum rating for a long time, the reliability of the product may be affected.
*1:The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
*2:Except for the power dissipation, operating ambient temperature, and storage temperature, all ratings are for Ta = 25°C.
*3:RF signal input pin. Do not apply DC current.
*4:(Vcc + 0.3) V must not be exceeded 3.6 V
0.06W0.12W833.3℃/WSSMINI-5DC
PD (Ta=70 °C)PD (Ta=25 °C)θ
JA
PACKAGE
POWER DISSIPATION RATING
Note). For the actual usage, please refer to the PD-Ta characteristics diagram in the package specification, supply
voltage, load and ambient temperature conditions to ensure that there is enough margin follow the power and
the thermal design does not exceed the allowable value.
CAUTION
Although this has limited built-in ESD protection circuit, but permanent damage may occur on it.
Therefore, proper ESD precautions are recommended to avoid electrostatic damage to the MOS gates
RECOMMENDED OPERATING CONDITIONS
2.85
Typ.
2.70
Min.
*1V3.0V
CC
Supply voltage range
NoteUnitMax.SymbolParameter
Note) *1 : The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
