Datasheet
www.rohm.com TSZ02201-0RAR0G200330-1-2
© 2013 ROHM Co., Ltd. All rights reserved.
2/18
6.Dec.2013 Rev.001
TSZ22111・15・001
BU7475HFV BU7475SHFV
Line-up
Topr Package Orderable Part Number
-40°C to +85°C HVSOF5 Reel of 3000 BU7475HFV-TR
-40°C to +105°C HVSOF5 Reel of 3000 BU7475SHFV-TR
Absolute Maximum Ratings (T
A
=25°C)
Parameter
Symbol
Rating
Unit
BU7475HFV
BU7475SHFV
Supply Voltage VDD-VSS +7 V
Power Dissipation P
D
0.53
(Note 1,2)
W
Differential Input
Voltage
(Note 3)
V
ID
VDD - VSS V
Input Common-mode
Voltage Range
V
ICM
(VSS - 0.3) to VDD + 0.3 V
Input Current
(Note 4)
I
I
±10 mA
Operating Supply Voltage V
opr
+1.7 to +5.5 V
Operating Temperature T
opr
-40 to +85 -40 to +105 °C
Storage Temperature T
stg
-55 to +125 °C
Maximum
Junction Temperature
T
Jmax
+125 °C
(Note 1) To use at temperature above T
A
=25C reduce 5.4mW.
(Note 2) Mounted on a FR4 glass epoxy PCB 70mm×70mm×1.6mm (Copper foil area less than 3%)
(Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VSS.
(Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied.
The input current can be set to less than the rated current by adding a limiting resistor.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open
circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case
the IC is operated over the absolute maximum ratings.