T16
www.vishay.com
Vishay
Revision: 16-Feb-17
3
Document Number: 40139
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL PERFORMANCE CHARACTERISTICS OF T16 CAPACITORS
ELECTRICAL CHARACTERISTICS
ITEM PERFORMANCE CHARACTERISTICS
Operating temperature range -55 °C to +85 °C (to +125 °C with voltage derating)
Capacitor tolerance ± 20 %, ± 10 % at 120 Hz, at +25 °C
Capacitor change by temperature Limit per Standard Ratings table
ESR Limit per Standard Ratings table, at +25 °C, 120 Hz
Impedance Limit per Standard Ratings table, at -55 °C, 120 Hz
DCL (leakage current) Limit per Standard Ratings table
AC ripple current Limit per Standard Ratings table, at +85 °C and 40 kHz
Reverse voltage Reverse voltage shall be in accordance with MIL-PRF-39006, paragraphs 3.23 and 4.8.19.
Surge voltage
Surge voltage shall be in accordance with MIL-PRF-39006 and Table II of DLA 13017.
The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under
any conditions including transients and peak ripple at the highest line voltage.
The DC surge voltage is 115 % of rated DC voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage shall not exceed the specified value in catalog
b) Capacitance shall be within +5 %, -20 % of initial value
c) ESR shall not exceed the specified value in catalog
PERFORMANCE CHARACTERISTICS
ITEM PERFORMANCE CHARACTERISTICS
Life testing Capacitors shall be capable of withstanding a 2000 h life test at a temperature +85 °C at rated
voltage, or a 2000 h life test at 125 °C test at derated voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage at 85 °C and 125 °C shall not exceed 125 % of the specified value
b) DC leakage at 25 °C shall not exceed the specified value
c) Capacitance shall be within +10 %, -20 % of initial value
d) ESR shall not exceed 200 % of the specified value
ENVIRONMENTAL CHARACTERISTICS
ITEM CONDITION COMMENTS
Seal MIL-PRF-39006 When the capacitors are tested as specified in MIL-PRF-39006,
there shall be no evidence of leakage.
Moisture resistance MIL-PRF-39006 Moisture resistance shall be in accordance with MIL-PRF-39006.
Number of cycles: 10 continuous cycles
Barometric pressure
(reduced)
MIL-STD-202, method 105, condition E Altitude 150 000 feet