For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 275
Evaluation PCB
Item Description
J1, J2 SRI PC Mount SMA Connector
J3, J4 2mm DC Header
C1 - C6 100 pF capacitor, 0402 pkg.
C7 - C12 2.2μF Capacitor, Tantalum
U1 HMC487LP5 / HMC487LP5E Ampli er
PCB
[2]
108188 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
List of Materials for Evaluation PCB 108190
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. Copper
lled vias under the device are recommended. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
HMC487LP5 / 487LP5E
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
v01.0705
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
