OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

VO618A-3X017T

P1-P3P4-P6P7-P8
VO618A
www.vishay.com
Vishay Semiconductors
Rev. 1.3, 22-Nov-12
1
Document Number: 83432
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, High Reliability, 5300 V
RMS
DESCRIPTION
The 110 °C rated VO618A feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which is
optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation up to an
operation voltage of 400 V
RMS
or DC. Specifications subject
to change.
FEATURES
• Operating temperature from - 55 °C to + 110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 V
RMS
• High collector emitter voltage, V
CEO
= 80 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•AC adapters
•SMPS
•PLC
• Factory automation
• Game consoles
AGENCY APPROVALS
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO EN 60065, EN 60950-1
• CQC GB8898-2001
Note
• Additional options may be possible, please contact sales office.
E
CA
C
1
2
4
3
ORDERING INFORMATION
VO6 1 8A - #X0 # # T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE
CTR (%)
1 mA
UL, cUL, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320
DIP-4 VO618A VO618A-2 VO618A-3 VO618A-4
VDE, UL, cUL, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320
DIP-4, 400 mil, option 6 - - - VO618A-4X016
SMD-4, option 7 - - VO618A-3X017T VO618A-4X017T
10.16 mm
Option 6
7.62 mm
DIP-4
> 8 mm
Option 7
VO618A
www.vishay.com
Vishay Semiconductors
Rev. 1.3, 22-Nov-12
2
Document Number: 83432
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted devices (SMD), and wave profile for soldering conditions for through hole
devices (DIP), please go to “Assembly Instructions” (www.vishay.com/doc?80054
).
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage V
R
6V
Forward current I
F
60 mA
Forward surge current t
p
≤ 10 μs I
FSM
2.5 A
LED power dissipation at 25 °C P
diss
70 mW
OUTPUT
Collector emitter voltage V
CEO
80 V
Emitter collector voltage V
ECO
7V
Collector current I
C
50 mA
Collector peak current t
p
/T = 0.5, t
p
≤ 10 ms I
CM
100 mA
Ouput power dissipation at 25 °C P
diss
150 mW
COUPLER
Isolation test voltage (RMS) t = 1 min V
ISO
5300 V
RMS
Total power dissipation P
tot
200 mW
Operation temperature T
amb
- 55 to + 110 °C
Storage temperature range T
stg
- 55 to + 150 °C
Soldering temperature
(1)
2 mm from case, ≤ 10 s T
sld
260 °C
0
50
100
150
200
250
0 20 40 60 80 100 120
P
tot
- Total Power Dissipation (mW)
T
amb
- Ambient Temperature (°C)
Coupled device
Detector
LED
VO618A
www.vishay.com
Vishay Semiconductors
Rev. 1.3, 22-Nov-12
3
Document Number: 83432
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I
F
= 5 mA V
F
1 1.15 1.65 V
Reverse current V
R
= 6 V I
R
0.01 10 μA
Junction capacitance V
R
= 0 V, f = 1 MHz C
j
13 pF
OUTPUT
Collector emitter leakage current V
CE
= 10 V I
CEO
10 200 nA
Collector emitter capacitance V
CE
= 5 V, f = 1 MHz C
CE
5.2 pF
Collector emitter breakdown voltage I
C
= 1 mA BV
CEO
80 V
Emitter collector breakdown voltage I
E
= 100 μA BV
ECO
7V
COUPLER
Collector emitter saturation voltage I
F
= 1 mA, I
C
= 2.5 mA V
CEsat
0.25 0.4 V
Coupling capacitance f = 1 MHz C
C
0.4 pF
CURRENT TRANSFER RATIO (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
I
C
/I
F
I
F
= 1 mA, V
CE
= 5 V
VO618A CTR 50 600 %
VO618A-2 CTR 63 125 %
VO618A-3 CTR 100 200 %
VO618A-4 CTR 160 320 %
SWITCHING CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION CTR BIN SYMBOL MIN. TYP. MAX. UNIT
NON-SATURATED
Rise and fall time I
F
= 1 mA, V
CC
= 5 V, R
L
= 75 Ω t
r
, t
f
2μs
Turn-on time
I
F
= 1 mA, V
CC
= 5 V, R
L
= 75 Ω
t
on
3μs
Turn-off time t
off
2.3 μs
Cut-off frequency I
F
= 1 mA, V
CC
= 5 V, R
L
= 75 Ω f
ctr
100 kHz
SATURATED
Turn-on time I
F
= 1 mA t
on
4.2 μs
Turn-off time I
F
= 1 mA t
off
23 μs
Rise time I
F
= 1 mA t
r
3μs
Fall time I
F
= 1 mA t
f
14 μs
P1-P3P4-P6P7-P8

VO618A-3X017T

Mfr. #:
Buy VO618A-3X017T
Manufacturer:
Vishay Semiconductors
Description:
Transistor Output Optocouplers Phototransistor Out CTR 100-200%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet