TLP597A
2 2017-06-08
Absolute Maximum Ratings
(Ta = 25°C)
CHARACTERISTIC SYMBOL RATING UNIT
LED
Forward Current I
50 mA
Forward Current Derating (Ta ≥ 25°C) ∆I
F
/°C -0.5 mA/°C
Peak Forward Current (100 μs pulse, 100 pps) I
FP
1 A
Reverse Voltage V
R
5 V
Diode Power Dissipation
P
D
50 mW
Diode Power Dissipation Derating (Ta ≥ 25°C)
P
D
/°C -0.5 mW/°C
Junction Temperature T
j
125 °C
DETECTOR
Off-State Output Terminal Voltage V
60 V
On-State RMS Current
A Connection
I
ON
500
mA B Connection 500
C Connection 1000
On-State Current Derating
(Ta ≥ 25°C)
A Connection
∆I
ON
/°C
-5.0
mA/°C B Connection -5.0
C Connection -10.0
Output Power
Dissipation
A connection
P
O
450
mW
B connection 225
C connection 450
Output Power
Dissipation Derating
(Ta ≥ 25°C)
A connection
ΔP
O
/°C
-4.5
mW / °C
B connection -2.25
C connection -4.5
Junction Temperature T
125 °C
Operating Temperature Range T
opr
-40 to 85 °C
Storage Temperature Range T
stg
-55 to 125 °C
Lead Soldering Temperature (10 s) T
sol
260 °C
Isolation Voltage (AC, 60 s, R.H. ≤ 60%) (Note 1) BV
2500 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Device considered a two-terminal device : Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted
together.
Recommended Operating Conditions
CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT
Supply Voltage V
DD
― ― 48 V
Forward Current I
5 7.5 25 mA
On-State Current I
― ― 400 mA
Operating Temperature T
opr
-20 ― 65 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.