SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
COAXIAL PINPAK
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
D-148-020X
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
REV.:
A
DATE:
16-Nov-06
DRAWN BY:
P.TALLY
CAGE CODE:
06090
REPLACES:
D990177
DCR NUMBER:
D060403
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 2006 Tyco Electronics Corporation. All rights reserved
If this document is printed it becomes uncontrolled. Check for the latest revision.
Pin Dimensions Product Dimensions Cable Dimensions
øM max = 0.68
(0.027)
øM max = 0.88
(0.035)
Product Name Product Name
Pitch
H±0.3
(H±0.012)
øA
min
øB
min
øC
min
L
max
K
nom
øD
øE øF
min
D-148-0201
2.54(0.10) 3.4 2.3 0.8 28 14 1.7(0.065) 1.3(0.050) 0.3
D-148-0202 D-148-0204
5.08(0.20) (0.135) (0.090) (0.030) (1.100) (0.550) to to (0.012)
D-148-0203 D-148-0205
6.35(0.25) 3.4(0.135) 2.3(0.090)
D-148-0206
2.54(0.10) 4.4 2.8 1.6 30 14 1.7(0.065) 1.5(060) 0.3
D-148-0207 D-148-0209
5.08(0.20) (0.175) (0.110) (0.060) (1.180) (0.550) to to (0.012)
D-148-0208 D-148-0210
6.35(0.25) 4.4(0.175) 2.8(0.110)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color: clear.
4. TERMINATION PIN: Phosphor bronze coated with Sn60 Pb40 solder alloy.
APPLICATION
1. These controlled soldering devices are designed for termination of coaxial cables to printed circuit board. They will terminate
the tin plated or silver plated copper center conductor and the single or double tin or silver plated copper braid of a coaxial
cable having an insulation rated for at least 125°C.
The lead may need to be aligned prior to insertion into the board.
2. Temperature range: -55°C to +150°C.
For installation, see RPIP-500-03.
For best results, prepare
the cable as shown:
* A trademark of Raychem Corporation.
