SPECIFICATION
TN-1500-112□ TN-1500-124□ TN-1500-148□ TN-1500-212□ TN-1500-224□ TN-1500-248□
200 / 220 / 230 / 240VAC selectable by setting button S.W
50 0.1Hz 50/60Hz selectable by setting button S.W±
75A
24V
21 ~ 30VDC
89%
37.5A
48V
42 ~ 60VDC
89%
75A
24V
21 ~ 30VDC
90%
37.5A
48V
42 ~ 60VDC
91%
MODEL
WAVEFORM
Note.2
OUTPUT
FREQUENCY
AC REGULATION (Typ.)
TRANSFER TIME (Typ.)
FRONT PANEL INDICATOR
SAVING MODE (Typ.)
NO LOAD DISSIPATION (Typ.)
BAT. VOLTAGE
OFF MODE CURRENT DRAW
VOLTAGE RANGE (Typ.)Note.3,6
EFFICIENCY (Typ.) Note.2
DC CURRENT (Typ.) Note.5
INPUT
INPUT
PROTECTION
BATTERY
OUTPUT
FUSE
SAFETY &
EMC
BAT. LOW ALARM
BAT. LOW SHUTDOWN
OVER TEMPERATURE
OUTPUT SHORT
REVERSE POLARITY
GFCI PROCTECTION
100 / 110 / 115 / 120VAC selectable by setting button S.W
1725W for 180 sec. / 1875W for 10 sec. / surge power 3000W for 30 cycles
True sine wave (THD<3%)
60 0.1Hz 50/60Hz selectable by setting button S.W±
150A
12V
10.5 ~ 15VDC
88%
40A*5 30A*3 30A*2
30A*230A*3
11.3 4%±
22.5 4%± 45 4%±45 4%±22.5 4%±
10.5 4%± 21 4%± 42 4%±42 4%±21 4%±
±3.0%
10ms inverter by pass
Default disabled. Load 5W will be changed to standby mode≦
Battery voltage level, output load level, saving mode, fault and operation status
≦18W @ standby saving mode
12V
≦1mA
10.5 ~ 15VDC
87%
150A
40A*5
11.3 4%±
10.5 4%±
82 5℃± ℃
Protection type : Shut down o/p voltage, re-power on to recover ; by internal RTH3 detect on heatsink of power transistor
Protection type : Shut down o/p voltage, re-power on to recover
82 5℃± ℃ 96 5℃± ℃ 68 5℃± ℃ 68 5℃± ℃ 68 5℃± ℃
By internal fuse open
Optional (Only type F) None
10A
Compliance to FCC class A, EAC TP TC 020
Compliance to EAC TP TC 020
WORKING TEMP. Note.1
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
LVD
SAFETY STANDARDS
0 ~ +40 @ 100% load ; 60 @ 50% load
℃℃
20% ~ 90% RH non-condensing
-30 ~ +70 / -22 ~ +158 F, 10 ~ 95% RH non-condensing℃
o
None
EN60950-1
Compliance to EN61000-4-2,3,4,5,6,8,11, EAC TP TC 020
Compliance to EN55032 class B, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EAC TP TC 020
True sine wave output (THD<3%)
High surge power up to 3000W
U.P.S. mode and energy saving mode (selectable)
High efficiency up to 91%
Power ON-OFF switch
Standby saving mode can be selectable
Front panel indicator for operation status
Thermostatically controlled cooling fan
Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp.
/ Output short / Input polarity reverse / Overload / AC circuit breaker
Application : Home appliance, power tools, office and portable
equipment, vehicle and yacht ...etc.
Built-in solar / AC charger
Computer-based monitoring software (Note.7)
3 years warranty
RATED POWER (Typ.) 1500W
BATTERY TYPES
Open & sealed Lead Acid
OVER LOAD (Typ.)
CIRCUIT BREAKER
105 ~ 115% load for 180 sec., 115% ~ 125% load for 10 sec.
Protection type : Shut down o/p voltage, re-power on to recover
15A
WITHSTAND VOLTAGE
Bat I/P - AC I/P:3.0KVAC Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC
VIBRATION
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
U 458 (L only for "GFCI" receptacle-Type F ), EAC TP TC 004
■ Features :
1500W True Sine Wave DC-AC Inverter with Solar Charger
TN-1500 series
MAX OPEN CIRCUIT VOLTAGE
CHARGE CURRENT (Typ.)
CHARGE CURRENT (max.)
CHARGE VOLTAGE
CHARGE VOLTAGE
25V
5.5A
30A
14.3V 4±
%
14.3V 4± %
SOLAR
CHARGER
AC
CHARGER
28.5V 4±
%
28.5V 4± %
2.7A
75V
57V 4%±
57V 4±
%
1.35A
EAC TP TC 004
45V
28.5V 4±
%
28.5V 4± %
2.7A
75V
57V 4±
%
57V 4± %
1.35A
14.3V 4±
%
14.3V 4± %
5.5A
45V
25V
OTHERS
PACKING
6.85Kg; 2pcs/15.7Kg/1.61CUFT
DIMENSION
CONTROL WIRING Note.7
420*220*88mm (L*W*H)
RJ11 -RS232
NOTE
1.Output derating capacity referenced by curve 1.
2.THD and Efficiency is tested by 1000W, linear load at 13V, 26V, 52V input voltage.
3.Input derating capacity referenced by curve 2.
4.All parameters not specified above are measured at rated load, 25 of ambient temperature and set to factory setting.
℃
5.DC current is tested by 1500W, linear load at 13V, 26V, 52V input voltage.
6.The tolerance of each voltage value by models is:112/212 0.5V;124/224 1V;148/248 2V.
→± →± →±
7.The cable is enclosed for the connection between TN-1500 and computer for software monitoring.
8.Please do not turn on the inverter before start the engine if inverter connect to vehicle’s battery directly.
9.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
AC VOLTAGE
Factory setting set at 110VAC Factory setting set at 230VAC
PROTECTION
ENVIRONMENT
MAXIMUM OUTPUT POWER (Typ.)
E
13
EMC IMMUNITY
EMC EMISSION
File Name:TN-1500-SPEC 2018-01-15
