https://www.phoenixcontact.com/pi/products/2938976
08/20/2018Page4/6
Power supply unit-QUINT-PS-100-240AC/48DC/20-2938976
Technical data
Signaling
Continuous load current ≤ 20 mA
Status display "DC OK" LED green
Note on status display
U
OUT
< 0.9 x U
N
: LED flashing
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 10
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Screw thread M3
Output name DC OK floating
Output description
Relay contact, U
OUT
> 0.9 x U
N
: Contact closed
Maximum switching voltage ≤ 30 V AC/DC
Maximum inrush current ≤ 1 A
Continuous load current ≤ 1 A
Status display "DC OK" LED green
Note on status display
U
OUT
< 0.9 x U
N
: LED flashing
Standards and Regulations
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 55011 (EN 55022)
Noise immunity EN 61000-6-2:2005
Connection in acc. with standard CUL
Standards/regulations EN 61000-4-2
Contact discharge 8 kV
Standards/regulations EN 61000-4-3
Frequency range 80 MHz ... 2 GHz
Test field strength 10 V/m
Standards/regulations EN 61000-4-4
EN 61000-4-5
Signal 1 kV (level 2 - asymmetrical: conductor to ground)
Standards/regulations EN61000-6-3
EN61000-4-6
Frequency range 0.15 MHz ... 80 MHz
Voltage 10 V
Standards/regulations EN 61000-4-11
Low Voltage Directive Conformance with LV directive 2006/95/EC
Standard - Safety of transformers EN 61558-2-17
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)