Amphenol Canada Corp. Page 2 of 3
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2013 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
S6080C Rev 1.0
General Requirements
RoHS compliant
Footprint compatible with other industry suppliers
Press-fit cage and connector combo for minimum 3.00 mm (0.118in) PCB thickness in belly-to-
belly application
Cages are tray packed
Dust cover for front face is available (bulk packed)
Proper support for cage is required during insertion into PCB
Extraction tool required for removing the combo from PCB (consult factory)
Connector Electrical Characteristics
Operating Voltage: 3.3V
Operating Current: 1.875A
Connector Mechanical Characteristics
Insertion Force: 80 N
Withdrawal Force: 50 N
Durability: 200 mating cycles
Material Requirements
Unless otherwise specified, the materials for each component shall be:
Cage: Copper alloy, matte tin over nickel or nickel only plating
Heat Sink: Aluminum alloy, anodized or nickel plated
Heat Sink Clip: Steel alloy
Connector Cover: Zinc alloy, nickel plated
Temperature rise: Meets the requirement of 30° C ΔT
Operating and storage temperature: -40° to +85° C
Process Characteristics
Cage assembly is press-fit to customer PCB
Connector cover is screw-mounted
PCB Specifications
Compliant Pin Holes must be drilled and plated through to specific dimensions to prevent damage
during placement of cage assembly on the PCB. See table below.
Recommended torque for connector cover mounting screws is 0.90±0.10 in·lb
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telecom, server &
computer, storage &
HDD, consumer
electronics and
entertainment,
professional audio &
Industrial &
Military/Aerospace.
Related Products
QSFP+
CXP
38 POSITION CONNECTOR
1x3 BEHIND THE BEZEL CAGE
ASSEMBLY WITH HEAT SINK AND
LIGHT PIPES
THRU THE BEZEL CAGE
ASSEMBLY WITH HEAT SINK
CAGE AND CONNECTOR
ASSEMBLY WITH ROUND PIN
HEAT SINK AND ELASTOMER
GASKET