AV6 (CS) Subminiature Switches
–2–
AECTB60E 201509-T
PRODUCT TYPES
■ Lever position: Standard
■ Lever position: Backward
SPECIFICATIONS
■ Contact rating
■ Characteristics
■ Operating characteristics
1) Lever position: Standard
Actuator Operating Force OF, Max.
Contact form
SPST-NC SPST-NO
Pin plunger
0.50N AV620264 AV630264
1.50N AV620564 AV630564
Hinge lever
0.20N AV622264 AV632264
0.50N AV622564 AV632564
Simulated roller lever
0.20N AV624264 AV634264
0.50N AV624564 AV634564
Roller lever
0.20N AV625264 AV635264
0.50N AV625564 AV635564
Actuator Operating Force OF, Max.
Contact form
SPST-NC SPST-NO
Hinge lever
0.35N AV62221264 AV63221264
1.00N AV62251264 AV63251264
Simulated roller lever
0.35N AV62421264 AV63421264
1.00N AV62451264 AV63451264
Roller lever
0.35N AV62521264 AV63521264
1.00N AV62551264 AV63551264
Contact Contact voltage Resistive load (cos
φ
] 1)
Au-clad double layer contact
30V DC 0.1A
5V DC 1mA Low-level circuit rating
Item Specifications
Expected life
Mechanical (OT max.) Min. 5 × 10
5
(at 60 cpm)
Electrical (Rated load OT max.) Min. 2 × 10
5
(at 20 cpm)
Insulation resistance Min. 100MΩ
Dielectric strength
Between non-continuous terminals 1,000 Vrms for 1 min.
Between each terminal and other
exposed metal parts
1,500 Vrms for 1 min.
Between each terminal and ground 1,500 Vrms for 1 min.
Contact resistance (initial)
100mΩ max. (by voltage drop 0.1A 6 to 8 VDC)
Value includes the resistance between the connector and the lead (#AWG28, length: 50 mm)
Viblation resistance (malfunction vibration resistance) 10 to 55 Hz at single amplitude of 0.75mm (Contact opening: max. 1msec.)
Shock resistance (malfunction shock resistance)
Applied shock 1.50N type: Min.300m/s
2
(Contact opening: Max. 1msec.)
0.50N type: Min.150m/s
2
(Contact opening: Max. 1msec.)
Connector insertion force Max. 20N (inserted in removal direction)
Connector holding force Min. 20N (extracted by static load, in removal direction)
Connector removal operating times Max. 5 times (in removal direction)
Allowable operating speed (No load) 0.1 to 1,000 mm/s (at pin plunger)
Max. operating cycle rate (No load) 300 cpm
Ambient temperature –25 to +85°C (No freezing and condensing)
Unit weight Approx. 2.5g (pin plunger type)
Contact specifications Contact material CuNi alloy + Au-clad
Protection grade IP40
Actuator
Operating Force OF,
Max.
Release Force RF,
Min.
Pretravel PT,
Max.
Movement Differential
MD, Max.
Overtravel OT,
Min.
Operating Position
OP
Pin plunger
0.50N 0.04N
0.6mm 0.1mm 0.4mm 8.4±0.3mm
1.50N 0.25N
Hinge lever
0.20N 0.02N
2.6mm 0.8mm 1.2mm 10.0±0.8mm
0.50N 0.06N
Simulated roller lever
0.20N 0.02N
2.6mm 0.8mm 1.2mm 12.2±0.8mm
0.50N 0.06N
Roller lever
0.20N 0.02N
2.6mm 0.8mm 1.2mm 15.7±0.8mm
0.50N 0.06N
