SPECIFICATION
RSP-100-3.3 RSP-100-5 RSP-100-7.5 RSP-100-12
RSP-100-13.5
RSP-100-15 RSP-100-24 RSP-100-27 RSP-100-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
REMOTE CONTROL
FUNCTION
AC CURRENT (Typ.)
3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
20A 20A 13.5A 8.5A 7.5A 6.7A 4.2A 3.8A 2.1A
0 ~ 20A 0 ~ 20A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7.5A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 3.8A 0 ~ 2.1A
66W 100W 101.25W 102W 101.25W 100.5W 100.8W 102.6W 100.8W
100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
±0.5% ±0.5% ±0.5% ±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%±1.0% ±1.0% ±1.0%
600ms, 30ms at full load
16ms at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
PF>0.93/230VAC PF>0.98/115VAC at full load
83% 86% 87% 86% 86.5% 87% 87% 87% 88%
1.1A/115VAC 0.55A/230VAC
COLD START 30A/230VAC
<2mA / 240VAC
105 ~ 135% rated output power
3.63 ~ 4.46V 5.5 ~ 6.75V
8.25 ~ 10.13V
13.2 ~ 16.2V
14.85 ~ 18.23V
16.5 ~ 20.25V 26.4 ~ 32.4V
29.7 ~ 36.45V
52.8 ~ 64.8V
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, re-power on to recover
CN1: < 0~0.8VDC POWER ON , 4~10VDC POWER OFF
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH non-condensing℃
±℃ ℃0.05%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
288.5K hrs min. MIL-HDBK-217F (25 )℃
179*99*30mm (L*W*H)
0.52Kg; 24pcs/14.5Kg/0.84CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
5. Strongly recommended that external output capacitance should not exceed 5000uF. Only for: RSP-100-3.3/-5/-7.5)(
6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
(as available on http://www.meanwell.com)
File Name:RSP-100-SPEC 2018-01-12
100W Single Output with PFC Function
RSP-100 series
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
1U low profile 30mm
Remote ON-OFF control
LED indicator for power on
Over voltage category Ⅲ
100% full load burn-in test
3 years warranty
■
Features :
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V14.3 ~ 16.5V
EMC IMMUNITY
EMC EMISSION
OVER TEMPERATURE
Shut down o/p voltage, recovers automatically after temperature goes down
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
UL60950-1, TUV EN60950-1, EN61558-1, EN61558-2-16, .1 approvedCCC GB4943EAC TP TC 004,
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, Class BEAC TP TC 020, GB9254 , GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A, EAC TP TC 020
I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
OVER VOLTAGE CATEGORY
According to E 61558, EN50178,EN60664-1, EN62477-1 altitude up to 2000Ⅲ;;N meters
S
&
E
