https://www.phoenixcontact.com/us/products/2905219
10/29/2015Page3/5
EMC filter surge protection device-SFP 1-15/120AC/EX-2905219
Technical data
Protective circuit
Inductivity in series 2x 1 mH ±30 % (with current compensation)
Capacity (L-N) 2 µF ±10 % (X2, FOW X2-250V)
Capacity (L-PE) 2.2 nF ±20 % (Y, FOW X2-250V)
Capacity (L-PEN) 2.2 nF ±20 % (Y, FOW X2-250V)
Max. required back-up fuse 20 A (gL / gG)
20 A (MCB, > 125 V, AIC: 14 kA)
Input attenuation aE, sym. typ. 40 dB (≥ 500 kHz / 50 Ω)
Input attenuation aE, asym. typ. 30 dB (≥ 1 MHz / 50 Ω)
Indicator/remote signaling
Connection name Remote fault indicator contact
Switching function PDT contact
Connection method Pluggable screw connection
Screw thread M2
Tightening torque 0.25 Nm
Stripping length 7 mm
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section AWG min. 28
Conductor cross section AWG max. 16
Connection data
Connection name Input/output
Connection method Screw terminal blocks
Conductor cross section flexible min. 2.5 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section solid min. 2.5 mm²
Conductor cross section solid max. 6 mm²
Screw thread M3
Tightening torque 0.5 Nm ... 0.6 Nm
5 lb
f
-in. ... 7 lb
f
-in.
Stripping length 8 mm
Protective circuit, filter
Discharge resistor ≤ 390 kΩ