15
Disc Ceramic Capacitors
General Specifications - Class III Semi Conducting
Measured at 1.0 kHz / 0.1 Vrms / 25ºC
Dissipation C
R
≤ 22 nF → Y5V, Y5U ≤ 7.5%
Factor (%) C
R
> 22 nF → Y5V, Y5P ≤ 5.0%
Y5P → ±20% / -20 +50%
Tolerance Y5U → ±20% / -20 +50%
Y5V → -20% +50% / -20 +80%
Insulation
Y5P ≥12 MΩ
Resistance
Y5U
4.7 nF...100 nF → ≥ 10 MΩ
(IR)
200 nF → ≥ 1 MΩ
Y5V ≥ 100 MΩ
Dielectric Strength
Between
Vt = 1.25 V
R
NOTE: Charging
leads
current limited
Body V
R
= 25V Vt = 100V (DC)
to 50 mA
insulation V
R
= 50V Vt = 150V (DC)
Operating
Temperature -30... +85ºC
Range (ºC)
Climate
30 / 85 / 21
Category
PERFORMANCE CHARACTERISTICS CLASS III
DIELECTRIC - CLASS III
A thin dielectric layer is grown on a disc of conductive
ceramic. Very large capacitances can be obtained due to
reduced thickness of this barrier layer and its inherently
high dielectric constant. Due to its small dimensions, they
are a less expensive replacement of multilayer ceramic or
polyester capacitors. An equivalent circuit is shown below:
Meets IEC 324 (1970).
5Z
Product Code
H
Voltage
104
Capacitance
Z
Tolerance
A
Lead
Forming
C
Capacitor
Diameter
A
Finishing
A
Packaging
HOW TO ORDER