1. General description
The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing,
that enables bidirectional voltage level translation. It features two 1-bit input-output ports
(A and B), one output enable input (OE) and two supply pins (V
CC(A)
and V
CC(B)
). V
CC(A)
can be supplied at any voltage between 1.65 V and 3.6 V. V
CC(B)
can be supplied at any
voltage between 2.3 V and 5.5 V. This flexibility makes the device suitable for translating
between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are
referenced to V
CC(A)
and pin B is referenced to V
CC(B)
. A LOW level at pin OE causes the
outputs to assume a high-impedance OFF-state. This device is fully specified for partial
power-down applications using I
OFF
. The I
OFF
circuitry disables the output, preventing the
damaging backflow current through the device when it is powered down.
2. Features and benefits
Wide supply voltage range:
V
CC(A)
: 1.65 V to 3.6 V and V
CC(B)
: 2.3 V to 5.5 V
Maximum data rates:
Push-pull: 50 Mbps
I
OFF
circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
ESD protection:
HBM JESD22-A114E Class 2 exceeds 2500 V for A port
HBM JESD22-A114E Class 3B exceeds 8000 V for B port
MM JESD22-A115-A exceeds 200 V
CDM JESD22-C101E exceeds 1500 V
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
Specified from 40 Cto+85C and 40 Cto+125C
3. Applications
I
2
C/SMBus
UART
GPIO
NTS0101
Dual supply translating transceiver; open drain; auto
direction sensing
Rev. 5 — 11 August 2014 Product data sheet
