CY7B951
Document Number: 38-02010 Rev. *A Page 9 of 10
© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
SUNI is a trademark of PMC-Sierra, Incorporated. All products and company names mentioned in this document may be the
trademarks of their respective holders.
Package Diagram
Figure 3. 24-Lead (300-Mil) SOIC S24.3/SZ24.3
PIN 1 ID
SEATING PLANE
0.597[15.163]
0.615[15.621]
112
13 24
*
*
*
0.291[7.391]
0.300[7.620]
0.394[10.007]
0.419[10.642]
0.050[1.270]
TYP.
0.092[2.336]
0.105[2.667]
0.004[0.101]
0.0118[0.299]
0.0091[0.231]
0.0125[0.317]
0.015[0.381]
0.050[1.270]
0.013[0.330]
0.019[0.482]
0.026[0.660]
0.032[0.812]
0.004[0.101]
PART #
S24.3 STANDARD PKG.
SZ24.3 LEAD FREE PKG.
MIN.
MAX.
NOTE :
1. JEDEC STD REF MO-119
2. BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH,BUT
MOLD PROTRUSION/END FLASH SHALL NOT EXCEED 0.010 in (0.254 mm) PER SIDE
3. DIMENSIONS IN INCHES
4. PACKAGE WEIGHT 0.65gms
DOES INCLUDE MOLD MISMATCH AND ARE MEASURED AT THE MOLD PARTING LINE.
51-85025-*C
