OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APDA1806SECK/J3-PRV

P1-P3P4-P4
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP3641 / 1203015735 Rev No: V.1A Date: 12/20/2017
Page 1 / 4
APDA1806SECK/J3-PRV
1.8 x 0.6 mm Right Angle SMD Chip LED Lamp
DESCRIPTIONS
The Hyper Red device is based on light emitting diode
chip made from AlGaInP
Electrostatic discharge and power surge could damage
the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
1.8 x 1.5 x 0.6 mm right angle SMD LED, 0.6 mm
thickness
Low power consumption
Ideal for backlight and indicator
Package: 4000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
Iv (mcd) @ 20mA
[2]
Viewing Angle
[1]
Min. Typ. 2θ1/2
APDA1806SECK/J3-PRV
■ Hyper Red (AlGaInP)
Water Clear
3900 7800
*1300 *2600
25°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP3641 / 1203015735 Rev No: V.1A Date: 12/20/2017
Page 2 / 4
APDA1806SECK/J3-PRV
ELECTRICAL / OPTICAL CHARACTERISTICS at T
A
=25°C
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
ABSOLUTE MAXIMUM RATINGS at T
A
=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. R
th JA
,R
th JS
Results from mounting on PC board FR4 (pad size≥ 16 mm
2
per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Parameter Symbol Emitting Color
Value
Typ. Max.
Wavelength at Peak Emission I
F
= 20mA λ
peak
Hyper Red 640 - nm
Dominant Wavelength I
F
= 20mA λ
dom
[1]
Hyper Red 625 - nm
Spectral Bandwidth at 50% Φ REL MAX
I
F
= 20mA
Δλ Hyper Red 20 - nm
Capacitance C Hyper Red 27 - pF
Forward Voltage I
F
= 20mA V
F
[2]
Hyper Red 2.2 2.8 V
Reverse Current (V
R
= 5V) I
R
Hyper Red - 10 uA
Temperature Coefficient of λ
peak
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
λpeak
Hyper Red 0.13 - nm/°C
Temperature Coefficient of λ
dom
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
λdom
Hyper Red 0.06 - nm/°C
Temperature Coefficient of V
F
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
V
Hyper Red -2 - mV/°C
Unit
Parameter Symbol Value Unit
Power Dissipation P
D
84 mW
Reverse Voltage V
R
5 V
Junction Temperature T
j
115 °C
Operating Temperature T
op
-40 to +85 °C
Storage Temperature T
stg
-40 to +85 °C
DC Forward Current I
F
30 mA
Peak Forward Current I
FM
[1]
150 mA
Electrostatic Discharge Threshold (HBM) - 3000 V
Thermal Resistance (Junction / Ambient) R
th JA
[2]
520 °C/W
Thermal Resistance (Junction / Solder point) R
th JS
[2]
410 °C/W
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP3641 / 1203015735 Rev No: V.1A Date: 12/20/2017
Page 3 / 4
APDA1806SECK/J3-PRV
HYPER RED
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
TAPE SPECIFICATIONS (units : mm)
REEL DIMENSION (units : mm)
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650 700 750 800
T
a
= 25 °C
Red
Wavelength (nm)
Relative Intensity (a. u.)
0.5 0.5
90°
15°
0°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
-75°
-90°
0.01.0 1.0
T
a
= 25 °C
0
10
20
30
40
50
1.5 1.7 1.9 2.1 2.3 2.5
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
T
a
= 25 °C
Forward current (mA)
Luminous intensity normalised at
20 mA
0
10
20
30
40
50
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous intensity normalised at
T
a
= 25 °C
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
SPATIAL DISTRIBUTION
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve
Luminous Intensity vs.
Ambient Temperature
P1-P3P4-P4

APDA1806SECK/J3-PRV

Mfr. #:
Buy APDA1806SECK/J3-PRV
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 1.8x0.6mm SMD RA RED
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet