OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

108648-HMC586LC4B

P1-P3P4-P6P7-P7
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
3
HMC586LC4B
v03.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 4 - 8 GHz
Absolute Maximum Ratings
Outline Drawing
Vcc +5.5 Vdc
Vtune 0 to +22V
Junction Temperature 135 °C
Continuous Pdiss (T = 85°C)
(derate 12.5 mW/°C above 85°C)
625 mW
Thermal Resistance
(junction to ground paddle)
80 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC586LC4B Alumina, White Gold over Nickel
MSL3
[1]
H586
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
4
HMC586LC4B
v03.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 4 - 8 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1 - 3, 5 - 11, 13,
17 - 24
N/C
No Connection. These pins may be connected to RF/DC
ground. Performance will not be affected.
4 Vtune
Control Voltage and Modulation Input. Modulation bandwidth
dependent on drive source impedance. See “Determining
the FM Bandwidth of a Wideband Varactor Tuned VCO”
application note.
12 Vcc Supply Voltage Vcc= +5V
14, 16 GND
Package bottom has an exposed metal paddle that
must also be RF & DC grounded.
15 RFOUT RF output (AC coupled)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
WIDEBAND VCOS - SMT
5
HMC586LC4B
v03.0514
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 4 - 8 GHz
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed ground paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
Evaluation PCB
List of Materials for Evaluation PCB 108648
[1]
Item Description
J1 PCB Mount SMA RF Connector, Johnson
J2 PCB Mount SMA Connector, SRI
J3 DC Header
C1 1000 pF Capacitor, 0402 Pkg.
C2 4.7 µF Capacitor, Tantalum
U1 HMC586LC4B VCO
PCB
[2]
108646 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P7

108648-HMC586LC4B

Mfr. #:
Buy 108648-HMC586LC4B
Manufacturer:
Analog Devices Inc.
Description:
BOARD EVAL AMP MMIC HMC586
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet