chipv0102_reli-PRP2
chipv0102_reli_e-01
■ RELIABILITY DATA
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Operating Temperature Range
Specified Value
VR1005 : ー55～
＋125℃
VR063, VR105C : ー40～
＋85℃
2. Storage Temperature Range
Specified Value ー55～
＋125℃
3. Rated voltage
Specified Value Refer to the part number section.
【Test Methods and Remarks】
M
aximum DC f
or continuous application within operating temperature range.
4. Varistor voltage
Specified Value Refer to the part number section.
【Test Methods and Remarks】
V
oltage between terminals at application of DC 1mA.
5. Clamp voltage
Specified Value Refer to the part number section.
【Test Methods and Remarks】
8
/20μs, 0.1A
6. Capacitance
Specified Value Refer to the part number section.
【Test Methods and Remarks】
M
easured at s
pecified measuring frequency, 1 Vrms, 0V bias.
7. ESD Peak voltage
Specified Value Refer to the part number section.
【Test Methods and Remarks】
1
50pF 330Ω c
ontact discharge (IEC61000-4-2)
Maximum ES
D voltage that can be withstood without deteriorating varistor characteristics when an ESD voltage is applied once.
8. Withstanding surge current
Specified Value Refer to the part number section.
【Test Methods and Remarks】
M
aximum cu
rrent that can be withstood without deteriorating varistor characteristics when an impulse current (8/20μs) is applied once.
9. High Temperature Loading
Specified Value
VR1005, 063 : ΔV1
mA/V1mA≦±10％
VR105C : ΔCp
/Cp≦±30％
【Test Methods and Remarks】
V
R1005 : 125±3℃
Rated voltage 500h±12h
VR063, VR105C : 85±3℃
Rated voltage 500h±12h
11. Thermal Shock
Specified Value
No mechanical damage.
VR
1005, VR063 : ΔV1
mA/V1mA≦±10％
VR105C : ΔCp
/Cp≦±30％
【Test Methods and Remarks】
C
onditions fo
r 1 cycle
Step1 : Minimum operating temperature
＋0
ー3
℃ : 30±3min.
Step2 : Room temperature : 2 t
o 3 min.
Step3 : Maximum operating temperature
＋0
ー3
℃ : 30±3min.
Step4 : Room temperature : 2 t
o 3 min.
Number of cycles : 5
12. Solderability
Specified Value More than 75% of the termination shall be covered with fresh solder.
【Test Methods and Remarks】
2
35±5℃, 2±0.
5 sec. Solder : H63A
Flux : Rosin ethanol solution (25wt%)
13. Resistance to Soldering Heat
Specified Value
No mechanical damage such as crack.
VR
1005, VR063 : ΔV1
mA/V1mA≦±10％
VR105C : ΔCp
/Cp≦±30％
【Test Methods and Remarks】
2
60±5℃, 10±1 s
ec. Solder : H63A
Flux : Rosin ethanol solution (25wt%)
14. Adhesive force of terminal electrodes
Specified Value Without electrode peeling.
【Test Methods and Remarks】
1
005, 105C Type :
After samples have been soldered to the PCB, a force of 5N (0.51kgf) in the horizontal direction shall be applied for 10±1 se
conds as shown in below diagram.
063 Type :
After samples have been soldered to the PCB, a force of 2N (0.20kgf) in the horizontal direction shall be applied for 10±1 seconds as shown in below diagram.
10. Humidity Loading
Specified Value
VR1005, VR063 : ΔV1
mA/V1mA≦±10％
VR105C : ΔCp
/Cp≦±30％
【Test Methods and Remarks】
4
0±2℃, 90 to 95％ R
H, Rated voltage, 500h±12h
