1
3
Notice for TAIYO YUDEN products 
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called TAIYO YUDENs official sales channel).
It is only applicable to the products purchased from any of TAIYO YUDEN s ofcial sales channel.
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and For-
eign Trade Control Law of Japan, U.S. Export Administration Regulations, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
1
3
Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourspecication.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourWebsite(http://www.ty-top.com/).
56
INDUCTORS POWER INDUCTORS
MU
LTILAYER CHIP POWER INDUCTORS (CK SERIES P TYPE / NM SERIES)
PARTS NUMBER
C K P 2 5 2 0 V 1 R 0 M T
△=Blank space
①Series name
Code Series name
CKP Multilayer chip power inductor
NM△
Multilayer chip power inductor
(Temperature characteristic improved)
②Dimensions(L×W)
Code Type(inch)
Dimensions
(L×W)[mm]
1608 1608(0603) 1.6×0.8
2012 2012(0805) 2.0×1.25
2016 2016(0806) 2.0×1.6
2520 2520(1008) 2.5×2.0
③Thickness
Code Thickness[mm]
V 1.2 max
1.0 max
N
C
D 0.95 max
M 0.8 max
L 0.55 max
④Nominal inductance
Code
(example)
Nominal inductance[μH]
1R0 1.0
R82 0.82
※R=Decimal point
⑤Inductance tolerance
Code Inductance tolerance
M ±20%
※NM 2520V2R2M: +30/-10%
⑥Packaging
Code Packaging
-T Taping
⑦Internal code
Code Internal code
Standard
STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Type L W T e
Standard quantity [pcs]
Paper tape Embossed tape
CKP1608
(0603)
1.6±0.15
(0.063±0.006)
0.8±0.15
( 0.031±0.006)
0.95 max
(0.037 max)
0.3±0.2
(0.012±0.008)
4000
CKP2012
NM 2012
(0805)
2.0±0.2
(0.079±0.008)
1.25±0.2
(0.049±0.008)
1.0 max
(0.039 max)
0.5±0.3
(0.02±0.012)
3000
2.0±0.2
(0.079±0.008)
1.25±0.2
(0.049±0.008)
0.55 max
(0.022 max)
0.5±0.3
(0.02±0.012)
3000
CKP2016
(0806)
2.0±0.2
(0.079±0.008)
1.6±0.2
(0.063±0.008)
1.0 max
(0.039 max)
0.5±0.3
(0.02±0.012)
3000
CKP2520
NM 2520
(1008)
2.5±0.2
(0.098±0.008)
2.0±0.2
(0.079±0.008)
0.8 max
(0.031 max)
0.5±0.3
(0.02±0.012)
3000
2.5±0.2
(0.098±0.008)
2.0±0.2
(0.079±0.008)
1.0 max
(0.039 max)
0.5±0.3
(0.02±0.012)
3000
2.5±0.2
(0.098±0.008)
2.0±0.2
(0.079±0.008)
1.2 max
(0.047 max)
0.5±0.3
(0.02±0.012)
2000
Unit:mm(inch)
MULTILAYER CHIP POWER INDUCTORS(CK SERIES P TYPE / NM SERIES)
REFLOWWAV E
1
3
Thiscatalogcontainsthetypicalspecicationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourspecication.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourWebsite(http://www.ty-top.com/).
57
INDUCTORS POWER INDUCTORS
PARTS NUMBER
CKP1608
(max.) (typ.)
CKP1608DR33M-T RoHS 0.33 ±20% 0.35 0.27 0.35 1 0.95
CKP1608DR50M-T RoHS 0.5 ±20% 0.15 0.12 0.9 1 0.95
CKP1608D1R0M-T RoHS 1.0 ±20% 0.20 0.17 0.75 1 0.95
CKP1608D2R2M-T RoHS 2.2 ±20% 0.30 0.27 0.65 1 0.95
CKP2012
(max.) (typ.)
CKP2012NR47M-T RoHS 0.47 ±20% 0.08 0.06 1.2 1 1
CKP2012NR50M-T RoHS 0.5 ±20% 0.08 0.06 1.2 1 1
CKP2012N1R0M-T RoHS 1.0 ±20% 0.14 0.11 1.0 1 1
CKP2012N1R5M-T RoHS 1.5 ±20% 0.20 0.15 0.8 1 1
CKP2012N2R2M-T RoHS 2.2 ±20% 0.20 0.15 0.8 1 1
CKP2012N3R3M-T RoHS 3.3 ±20% 0.24 0.20 0.7 1 1
CKP2012N4R7M-T RoHS 4.7 ±20% 0.28 0.23 0.7 1 1
CKP2016
(max.) (typ.)
CKP2016 R47M-T RoHS 0.47 ±20% 0.075 0.06 1.6 1 1.0
CKP2016 1R0M-T RoHS 1.0 ±20% 0.12 0.09 1.3 1 1.0
CKP2016 1R5M-T RoHS 1.5 ±20% 0.13 0.10 1.2 1 1.0
CKP2016 2R2M-T RoHS 2.2 ±20% 0.14 0.11 1.2 1 1.0
CKP2016 3R3M-T RoHS 3.3 ±20% 0.16 0.13 1.1 1 1.0
CKP2016 4R7M-T RoHS 4.7 ±20% 0.20 0.16 0.9 1 1.0
CKP2520
(max.) (typ.)
CKP2520M1R5M-T RoHS 1.5 ±20% 0.09 0.075 1.3 1 0.8
CKP2520M2R2M-T RoHS 2.2 ±20% 0.10 0.08 1.2 1 0.8
CKP2520 R47M-T RoHS 0.47 ±20% 0.05 0.04 1.8 1 1.0
CKP2520 1R0M-T RoHS 1.0 ±20% 0.08 0.065 1.4 1 1.0
CKP2520 1R5M-T RoHS 1.5 ±20% 0.09 0.075 1.3 1 1.0
CKP2520 2R2M-T RoHS 2.2 ±20% 0.09 0.075 1.3 1 1.0
CKP2520 3R3M-T RoHS 3.3 ±20% 0.12 0.09 1.2 1 1.0
CKP2520 4R7M-T RoHS 4.7 ±20% 0.15 0.12 1.1 1 1.0
CKP2520C1R0M-T RoHS 1.0 ±20% 0.08 0.06 1.4 1 1.0
CKP2520N1R0M-T RoHS 1.0 ±20% 0.115 0.09 1.2 1 1.0
CKP2520N2R2M-T RoHS 2.2 ±20% 0.115 0.09 1.2 1 1.0
CKP2520N2R7M-T RoHS 2.7 ±20% 0.15 0.12 1.1 1 1.0
CKP2520N4R7M-T RoHS 4.7 ±20% 0.16 0.14 1.1 1 1.0
CKP2520V1R0M-T RoHS 1.0 ±20% 0.12 0.09 1.2 1 1.2
CKP2520V2R2M-T RoHS 2.2 ±20% 0.15 0.12 1.1 1 1.2
CKP2520V2R7M-T RoHS 2.7 ±20% 0.15 0.12 1.1 1 1.2
CKP2520V3R3M-T RoHS 3.3 ±20% 0.15 0.11 1.1 1 1.2
CKP2520V4R7M-T RoHS 4.7 ±20% 0.16 0.14 1.1 1 1.2
NM 2012
(max.) (typ.)
NM 2012NR82M-T RoHS 0.82 ±20% 0.10 0.085 1.2 1 1.0
NM 2012N1R0M-T RoHS 1.0 ±20% 0.15 0.12 1.0 1 1.0
NM 2520
(max.) (typ.)
NM 2520N1R0M-T RoHS 1.0 ±20% 0.11 0.08 1.2 1 1.0
NM 2520V1R0M-T RoHS 1.0 ±20% 0.13 0.10 1.1 1 1.2
NM 2520V2R2M-T RoHS 2.2 30/-10% 0.22 0.18 0.9 1 1.2
※ Rated current specifies that self-heat generation is below 40 degC during DC loaded (at 20 degC).
DC Resistance
[Ω]
Rated current
[A](max.)
Measuring frequency
[MHz]
Thickness
[mm](max.)
Parts number EHS
Nominal inductance
[μH]
Inductance tolerance
EHS
Nominal inductance
[μH]
Inductance tolerance
Measuring frequency
[MHz]
DC Resistance
[Ω]
Rated current
[A](max.)
Thickness
[mm](max.)
Parts number EHS
Nominal inductance
[μH]
Inductance tolerance
Parts number EHS
Nominal inductance
[μH]
Inductance tolerance
Parts number
Measuring frequency
[MHz]
Thickness
[mm](max.)
DC Resistance
[Ω]
Rated current
[A](max.)
Measuring frequency
[MHz]
Thickness
[mm](max.)
DC Resistance
[Ω]
Rated current
[A](max.)
Parts number EHS
Nominal inductance
[μH]
Inductance tolerance
Measuring frequency
[MHz]
Thickness
[mm](max.)
DC Resistance
[Ω]
Rated current
[A](max.)
Measuring frequency
[MHz]
Thickness
[mm](max.)
Parts number EHS
Nominal inductance
[μH]
Inductance tolerance
DC Resistance
[Ω]
Rated current
[A
](max.

CKP25204R7M-T

Mfr. #:
Manufacturer:
Taiyo Yuden
Description:
Fixed Inductors INDCTR HICUR MLTLYR 1008 4.7uH 20%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet