OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AFBR-1629Z

P1-P3P4-P6P7-P9P10-P11
4
Versatile Link Printed Board Layout Dimensions
Horizontal Module Vertical Module
Tilted (30°) Module
7.62
[0.300]
2.54
[0.100]
7.7
[0.30
]
1.9
[0.07]
PCB EDGE
MIN.
123
4
8
5
Footprint - TOP VIEW
1
[

0
.0
4
]
NOTES:
1) Dimensions: mm [in]
7.62
[0.300]
3.8
[0.15]
3.8
[0.15]
7.62
[0.300]
2.54
[0.100]
2.25 [0.09] clearance hole
for optional vertical mount
self-tapping-screw #2
PCB EDGE
1.7
[0.07]
MIN.
1
2
3
4
5
8
Footprint - TOP VIEW
1
[
0
.
0
4
]
NOTES:
1) Dimensions: mm [in]
2.54
[0.100]
7.62
[0.300]
8.7
[0.34]
PCB EDGE
43
2
1
8
5
Footprint - TOP VIEW
2.2
[0.09]
MIN.
1
[
0
.
0
4
]
NOTES:
1) Dimensions: mm [in]
5
Interlocked (Stacked) Assemblies (refer to Figure 1)
Horizontal packages may be stacked by placing units with pins facing upward. Initially engage the inter -
locking mechanism by sliding the L bracket body from above into the L slot body of the lower package. Use
a straight edge, such as a ruler, to bring all stacked units into uniform alignment. This tech nique prevents
potential harm that could occur to  ngers and hands of assemblers from the package pins. Stacked horizontal
packages can be disengaged if necessary. Repeated stacking and unstack ing causes no damage to individual units.
To stack vertical packages, hold one unit in each hand, with the pins facing away and the optical ports on the bottom.
Slide the L bracket unit into the L slot unit. The straight edge used for horizontal package alignment is not needed.
Stacking Horizontal Modules Stacking Vertical Modules
Figure 1. Interlocked (stacked) Horizontal, Vertical and Tilted (30°) packages
Tilted (30°) Module
6
Pin Description Transmitter
Fiber port facing front, pins downward, 1 = Rightmost pin to 4 = Leftmost pin
Pin Name Function/Description Notes
1V
CCT
Transmitter Power 3.3 V ± 5% or 5 V ± 5%
2 No Pin No physical pin is available
3V
EET
Transmitter Ground
4 Data In Transmitter Data Input 1, 2
5 Housing Pin Physical pin is available, recommended to chassis GND 3
8 Housing Pin Physical pin is available, recommended to chassis GND 3
Pin Description Receiver
Fiber port facing front, pins downward, 1 = Rightmost pin to 4 = Leftmost pin
Pin Name Function/Description Notes
1 Data Out Receiver Data Output 2
2V
EER
Receiver Ground
3V
CCR
Receiver Power 3.3 V ± 5% or 5 V ± 5%
4 Pin No function, physical pin is available, recommended to signal GND 4
5 Housing Pin Physical pin is available, recommended to chassis GND 3
8 Housing Pin Physical pin is available, recommended to chassis GND 3
Notes:
1. Logic 1 input will turn the light on and the logic 0 will turn the light o for AFBR-16x4Z. Logic 1 input will turn the light o and the logic 0 will turn
the light on for AFBR-16x9Z.
2. TTL compatible data input and output.
3. Pin 5 and 8 are for mounting and retaining purposes, and should be connected to chassis GND.
4. It is recommended to connect this pin to signal GND.
TX
34
21
RX
34
21
P1-P3P4-P6P7-P9P10-P11

AFBR-1629Z

Mfr. #:
Buy AFBR-1629Z
Manufacturer:
Broadcom / Avago
Description:
Fiber Optic Transmitters, Receivers, Transceivers V-Link Horz 50MBd 50m POF, 3.3/5 V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet