Innovative Technology
for a Connected World
Tflex
TM
300 Series
Thermal Gap Filler
THR-DS-TFLEX-300 1010
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility
for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technolo-
gies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall
not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in
effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Tech-
nologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the
property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Document A15293-00 Rev D, 10/2009.
STANDARD THICKNESSES
0.020 to 0.200-inch (0.5 to 5.0mm)*
0.020 to 0.200-inch thick material available in 0.010-inch (0.25mm) increments
0.250-inch (6.4 mm) also available with TG liner option only.
*Inquire about availability of material and options above 0.200-inches
OPTIONS
Tgard
™
“TG” dielectric barrier available to aid in handling and PET dielectric “H” liner available for applications where easy slide assembly is desirable
MATERIAL NAME AND THICKNESS
Tflex™ indicates elastomeric gap filler product line
3xxx indicates high recovery ‘3 series’ 1.2 W/mK material
-DC1 designates proprietary tack eliminated coating
-TG indicates Tgard™ liner option
-H indicates hard PET liner option
EXAMPLES
Tex™ 3120 = standard 0.120-inch thick Tex™ 300 material
Tex™ 3120DC1 = 0.120-inch thick material with DC1 coating
Tex™ 3120TG = 0.120-inch thick material with Tgard™ liner
Tex™ 3120H = 0.120-inch thick material with hard PET liner
TFLEX
TM
300 TEST METHOD
Construction
Filled silicone
elastomer
NA
Color Light green Visual
Thermal Conductivity 1.2 W/mK ASTM D5470
Hardness (Shore 00)
27
(at 3 second delay)
ASTM D2240
Density 1.78 g/cc
Helium
Pyncometer
Thickness Range
0.020" - .200"
(0.5 - 5.0mm)*
Thickness Tolerance ±10%
UL Flammability Rating 94 V0 UL
Temperature Range -40ºC to 160ºC NA
Volume Resistivity 10 ^13 ohm-cm ASTEM D257
Outgassing TML 0.56% ASTM E595
Outgassing CVCM 0.10% ASTM E595
Coefcient Thermal
Expansion (CTE)
600 ppm/C
IPC-TM-650
2.4.24
TFLEX
TM
300 TYPICAL PROPERTIES
Pressure vs Deflection (AS TM D575)
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
0 10 20 30 40 50 60 70 80 90 100 110
320 330 340 360 380 3100
3150 3200
Pressure vs . thermal resistance (AS T M
D5470)
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0 10 20 30 40 50 60 70 80 90 100 110
Thermal
Ress itance
⁰
C-
in
2
/W
320 330 340 360 380 3100 3150 3200