TSOP373.., TSOP375..
www.vishay.com
Vishay Semiconductors
Rev. 1.8, 12-Dec-16
1
Document Number: 82446
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IR Receiver Modules for Remote Control Systems
ORDERING CODE
Taping:
TSOP37...TT1 - top view taped
TSOP37...TT2 - top view taped
FEATURES
• Very low supply current
• Photo detectors and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
The TSOP373.., TSOP375.. series are miniaturized receiver
modules for infrared remote control systems. A PIN diode
and a preamplifier are assembled on a PCB, the epoxy
package contains an IR filter. The demodulated output
signal can be directly connected to a microprocessor for
decoding.
The TSOP373.. series devices are optimized to suppress
almost all spurious pulses from energy saving lamps like
CFLs. AGC3 may also suppress some data signals if
continuously transmitted.
New designs should prefer the TSOP373.. series containing
the newer AGC3. The TSOP375.. series contain a very
robust AGC5. This series should only be used for critically
noisy environments.
These components have not been qualified according to
automotive specifications.
22531-1
PARTS TABLE
AGC
NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
Carrier
frequency
36 kHz TSOP37336
(1)
TSOP37536
38 kHz TSOP37338
(2)(3)(4)(5)
TSOP37538
40 kHz TSOP37340 TSOP37540
56 kHz TSOP37356 TSOP37556
Package Belobog
Pinning 1 = OUT, 2, 3, 6, 7, 8 = GND, 4, 5 = V
S
Dimensions (mm) 3.95 W x 3.95 H x 0.8 D
Mounting SMD
Application Remote control
Best remote control code
(1)
MCIR
(2)
Mitsubishi
(3)
RECS-80 Code
(4)
r-map
(5)
XMP-1, XMP-2