SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES
TE Connectivity
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE* DEVICE
LOW-FIRE-HAZARD SHIELD TERMINATION
LOW TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO
:
B-150-XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
D980574
REPLACES:
B150XX
DRAWN BY:
M. FORONDA
DATE:
06/29/98
REV.
SEE TABLE
DOC ISSUE:
3
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product Name øA
min
øB
min
L
max
D
max
øE
min
øF
min
øG
max
H±0.5
(H±0.020)
J±0.5
(J±0.020)
B-150-03 D 2.5
(0.098)
3.0
(0.118)
24.5
(0.964)
3.0
(0.118)
1.5
(0.059)
1.0
(0.039)
2.5
(0.098)
6.0
(0.236)
7.0
(0.275)
B-150-05 F 4.3
(0.169)
4.8
(0.189)
29.3
(1.153)
4.8
(0.189)
2.0
(0.078)
1.5
(0.059)
4.3
(0.169)
8.0
(0.315)
9.0
(0.354)
B-150-07 F 6.8
(0.267)
7.3
(0.287)
32.5
(1.279)
7.3
(0.287)
3.3
(0.130)
2.8
(0.110)
6.8
(0.267)
10.0
(0.393)
11.0
(0.433)
B-150-11 E 10.8
(0.425)
11.5
(0.452)
35.5
(1.397)
11.5
(0.452)
4.5
(0.177)
4.0
(0.157)
10.8
(0.425)
12.0
(0.472)
13.0
(0.512)
B-150-13 A 13.0
(0.512)
15.1
(0.594)
45.5
(1.79)
15.1
(0.594)
7.0
(0.275)
6.5
(0.256)
13.0
(0.512)
16.0
(0.630)
17.0
(0.669)
B-150-17 A 17.0
(0.669)
19.0
(0.748)
55.5
(2.165)
18.0
(0.748)
9.0
(0.354)
8.0
(0.315)
16.0
(0.630)
21.0
(0.827)
23.0
(0.905)
B-150-23 A 22.5
(0.885)
24.5
(0.964)
80.0
(3.149)
23.5
(0.925)
12.0
(0.472)
11.0
(0.433)
21.5
(0.846)
29.0
(1.142)
31.0
(1.220)
B-150-33 B 33.0
(1.299)
35.0
(1.380)
80.0
(3.149)
34.0
(1.338)
19.0
(0.748)
17.0
(0.689)
32.0
(1.259)
29.0
(1.142)
31.0
(1.220)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX.
SOLDER: TYPE Cd18 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic.
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin plated copper shield on a cable having an
insulation rated for at least +85°C.
2. Temperature range: -55°C to +125°C.
For installation procedure and application equipment, consult RPIP-688-00.
For best results, prepare
the cable as shown:
* A trademark of TE
connectivity.
