P1022NSN2LFB Datasheet P1022NSE2MHB, P1022NSE2LFB, P1013NXN2EFB | P1-P2

Freescale QorIQ communications platforms

are the next-generation evolution of our

leading PowerQUICC communications

processors. The P1022 family of processors,

a Freescale Energy-Efficient product solution,

is designed to deliver complex application

processing performance with exceptional

feature integration and high-speed connectivity

for IP networking and advanced media

processing applications. It combines dual e500

processor cores, built on Power Architecture

technology, with enhanced system peripherals

and interconnect technology to balance

processor performance with I/O system

throughput. The P1022 processor includes

advanced power and energy management

features that enable developers to design

next-generation embedded Internet media

processing applications with energy

efficiency levels under the environmental and

governmental energy regulatory requirements.

The P1013 single-core processor includes

the same family of system peripherals,

interconnect technology and advanced power

and energy management features.

Highlights

Dual-Core Processing

The pace of technology development, spurred

by the Internet and ubiquitous connectivity,

is putting additional challenges on design

engineers building state-of-the-art embedded

appliances or equipment. The P1022

provides the designer exceptional flexibility

for leveraging symmetric and asymmetric

multiprocessing strategies to reach nearly two

gigahertz equivalent single-core performance

in ultra-low-power envelopes. Equally

important are the robust operating systems

and tool support to streamline designers’

adoption of dual-core processing available on

the P1022 through Freescale and Freescale

partners.

High-Speed Connectivity

Freescale’s P1022 processor is positioned to

offer a wide range of high-speed connectivity

options. The flexibility of the processor is

due to highly integrated speed- and latency-

optimized technology. It is a highly scalable

processor designed to handle complex,

computationally demanding processing tasks

with ease. The P1022 processor includes

virtualized enhanced three-speed Ethernet

with TCP/UDP/IP offload, direct FIFO mode

for ASIC connectivity, SATA for local storage

and support for three PCI Express

interface

options. Moreover, the P1022 processor

features a field-proven, next-generation

memory controller and an optional hardware

acceleration engine for encryption protocols

and RAID processing.

QorIQ Communications Platforms

P1 Series

P1013/P1022 embedded processors with

advanced energy management

QorIQ P1022 and P1013 Block Diagram

32 KB

L1 I-Cache

Power Architecture

e500 Core

32 KB

L1 D-Cache

256 KB

L2 Cache

32 KB

L1 I-Cache

Power Architecture

e500 Core

32 KB

L1 D-Cache

DDR2/DDR3

SDRAM Controller

Not on P1013

Coherency Module

System Bus

2-ch. DMA Controller2-ch. DMA Controller3 x PCI Express

On-Chip NetworkOn-Chip Network

4-lane SerDes

(PCI Express/

SGMII)

Security

Acceleration

XOR

Advanced

Power

Management

DUART, 2 x I

C, Timers,

Interrupt Control,

SD/MMC, SPI,

2 x USB 2.0/ULPI, MPIC

2 x

Gigabit

Ethernet

RGMII

x2 SerDes

(PCI Express/

SATA/SGMII)

Enhanced Local Bus

Controller (eLBC)

Cores

2 x

SATA

LCD

(DIU)

TDM/

Freescale, the Freescale logo and PowerQUICC are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.

The Energy Efﬁcient Solutions Logo, QorIQ and QUICC Engine are trademarks of Freescale Semiconductor, Inc. All other

product or service names are the property of their respective owners. The Power Architecture and Power.org word marks

and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.

Document Number: QP1022FS / REV 1

System-Level Cost Saving

The P1022 processor’s highly integrated

architecture is designed to enhance

performance and deliver system-level cost

savings in a small board footprint. Key

system-level peripherals include dual Gigabit

Ethernet, dual USB 2.0, dual SATA, SD/

MMC and triple PCI Express interconnects.

Furthermore, the P1022 integrates LCD

controller, I

S audio and VoIP TDM interfaces

for use in creating engaging human interfaces.

Special care was taken to design the P1022

processor’s pin locations for mounting on

low-cost six layer PCBs. The P1022 is a

full-featured, high-performance gigahertz

processor that is designed to support fanless

operation for power-sensitive applications.

Advanced Energy-Efficient Modes

Balancing the performance requirements

for powerful new networking- and Internet-

centric applications, with the increasing

concerns over energy consumption, is driving

manufacturers to develop intelligent strategies

for optimizing performance within specific

energy budgets. This is a key challenge

for the next-generation green embedded

systems. The P1022 processor implements

sophisticated power-saving modes for

managing energy consumption in both

dynamic and static power modes. These

include the traditional nap, doze plus the

jog (dynamic frequency scaling) and packet-

lossless deep-sleep modes. Designers may

leverage these modes to efficiently match

work accomplished with the correct level of

energy consumed.

The combination of these features makes

the P1022 processor an optimal embedded

processing solution for Ethernet or PCI

Express interworking applications, such as

enterprise networking, industrial, storage,

security and office automation applications.

Examples include control plane processing,

protocol processing, media processing while

producing an engaging human machine

interface.

Key Features

• Dual(P1022)orsingle(P1013)high-

performance e500v2 cores built on Power

Architecture technology

36-bit physical addressing

Double precision floating point support

Signal processing engine (SPE) APU

(auxiliary processing unit)

32 KB L1 instruction cache and 32 KB L1

data cache for each core

600 MHz to 1055 MHz core

clock frequency

• 256KBL2cachewithECC,also

configurable as SRAM and stashing

memory

• 64-bitDDR2/DDR3SDRAMmemory

controller with ECC support

• Two10/100/1000Mbpsvirtualized

enhanced three-speed Ethernet controllers

(eTSECs)

TCP/IP acceleration and classification

capabilities

IEEE

1588 support

Loseless flow control

RMII, RGMII, SGMII

• Integratedsecurityengine(optional)

Crypto algorithm support includes 3DES,

AES,RSA/ECC,MD5/SHA,ARC4,

Kasumi, Snow 3G and FIPS deterministic

RNG

Single pass encryption/message

authentication for common security

protocols (IPsec, SSL, SRTP, WiMAX)

XOR acceleration

• High-speedinterfaces(notallavailable

simultaneously)

Six SerDes lanes (multiplexed across

controllers)

 Onex4andtwox1PCIExpress

interfaces

Two serial ATA (SATA) interfaces

Two SGMII interfaces

• Audiovisualinterfaces

LCD interface supporting a display of

1280x1024P@60Hz,24bitsperpixel

S interface with maximum sampling

frequency of 192 kHz

• VoIPTDMinterface

Support for up to 128 channels

• TwoHigh-SpeedUSBcontrollers(USB2.0)

Host and device support

Enhanced host controller interface (EHCI)

ULPI interface to PHY

• Enhancedsecuredigitalhostcontroller

(SD/MMC)

• Serialperipheralinterface

• Programmableinterruptcontroller(PIC)

compliant with Open-PIC standard

• Dualfour-channelDMAcontrollers

• DualI

C controllers, DUART, timers

• Enhancedlocalbuscontroller(eLBC)

• Advancedpowerandenergymanagement

Low power operation

Support for dynamic and static power

management

Doze, nap and sleep modes for dynamic

power management

Packet-lossless deep sleep: power

removed from major portion of the chip

PMC wake on: filtered LAN activity,

USB connection, GPIO, internal timer or

external interrupt event

• Upto87general-purposesignals

• Availableinextendedtemperature(optional)

• 689-pinTEPBGApackage

Learn More:

For current information about Freescale

products and documentation, please visit

freescale.com/QorIQ.

P1-P2

P1022NSN2LFB

Mfr. #:

Buy P1022NSN2LFB

Manufacturer:

NXP Semiconductors

Description:

IC MPU Q OR IQ 1.055GHZ 689TBGA QorIQ P1

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

P1022NSN2LFB

P1022NSN2LFB

Products related to this Datasheet