© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com F3086_F161 • 9/21/2016 10
Film Surface Mount Capacitors – General Purpose and High Stability
F161 Series Encapsulated Stacked, Size 2220 – 6560, 50 – 400 VDC
Flux & Cleaning
KEMETrecommendstouseano-cleanuxwithahalogencontentlowerthan0.1%.
To clean the PCB assembly KEMET recommends to use a suitable solvent like Isopropyl alcohol, deionized water or neutral
pH detergents. Aggressive solvents shall not be used. For any different cleaning solvent used please contact KEMET
Technical Services to analyze the potential impact on KEMET products.
Storage and Moisture Recommendations
KEMET SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 months shelf life
(temperature≤40°C/relativehumidity≤90%).AftertheMBBhasbeenopened,componentsmaystayinareaswithcontrolled
temperatureandhumidity(temperature≤30°C/relativehumidity≤60%)for168hours[MSL3].Forlongerperiodsoftime
and/or higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components
against humidity. If the reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas
without controlled temperature and humidity (see above). If the above conditions are not respected, components require a
baking(minimumtime:48hoursat55±5°C)beforethereow.
Packaging Quantities
Chip Size (EIA) Size Code
Base
(mm)
Height
(mm)
Length
(mm)
Bulk
Reel
Horizontal
Orientation
Reel
Vertical
Orientation
2220 PU 5 4 5.7 2000 2100
2824 SP 6 3.5 7.3 2000 2300
4036 WP 9.1 5.5 10.2 1000 800 500