Type 12 Mild Steel Junction Box
1414 SC Series
Lift-Off Cover with Screws
Application
Designed for use as instrument enclosures, electric, hydraulic or pneumatic
control housings, electrical junction boxes or terminal wiring enclosures.
Provides a degree of protection from falling dirt, dust, oil and water.
Standards
UL 508 Type 12 and 13
CSA Type 12 and 13
Complies with
NEMA Type 12 and 13
JIC EGP-1-1967 unless marked¹
IEC 60529, IP54
Construction
Body formed from 16 gauge or 14 gauge steel. Covers are formed from 14
gauge steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Welded brackets provide for enclosure mounting.
Cover is secured with captive, plated steel screws, threaded into sealed
wells.
Oil resistant gaskets are permanently secured.
Models larger than 4" x 4" include a removable 14 gauge inner panel.
Internal threaded weld studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided on
the enclosure.
Finish
Cover and enclosure are phosphatized and finished in ANSI 61 gray
recoatable powder coating.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.
